Electronics Forum | Thu Oct 11 13:10:04 EDT 2012 | anvil1021
We are experimenting with void control in reflow and have had pretty good luck for the most part in attaining Class lll IPC spec. but we have seen a sudden increase in voiding on a specific product and I was wondering if anyone has seen this extreme
Electronics Forum | Sat Jan 19 22:42:16 EST 2013 | ngineer
Ok, I managed to figure it out, and this is simply for anyyone having this issue. The issue was that the selected board or board folder did not reside in the selected board directory. the answer was to hold LSHIFT at startup to skip the autoexec of
Electronics Forum | Thu Apr 18 05:23:38 EDT 2013 | bobpan
To use 2 heads in autoprogram.....each one should be defined in the assembler system. You have to use the option to breakup programs for seperate central controllers if indeed they both have their own computer. The most important thing is each assemb
Electronics Forum | Thu Jul 17 17:40:13 EDT 2014 | proy
I just got a Vtek TM4400 used, and have manuals for most of it, however the operation/programming manual chapter 3 I have is for the newer Touchscreen interface. My unit is a 2 line backlit LCD with a membrane switch panel, I am looking for the oper
Electronics Forum | Thu Aug 14 22:22:30 EDT 2014 | proy
I just got a Vtek TM4400 used, and have manuals > for most of it, however the operation/programming > manual chapter 3 I have is for the newer > Touchscreen interface. My unit is a 2 line > backlit LCD with a membrane switch panel, I am > looki
Electronics Forum | Tue Aug 04 23:50:20 EDT 2015 | johnwnz
Hi folks, I was wondering what the combined wisdom was on the humidity effect on the MSD control required by the Jedec std. The std works on a relative humidity of 65%, if my RH is only say 30% because of factory environments how do I easily factor
Electronics Forum | Tue Oct 20 10:14:59 EDT 2015 | aemery
Florin, Not sure if this will be helpful or not, but I have completed a couple of pot height retrofits for these waves and I seemed to remember that one of my clients spilled some solder and shorted out the 24vdc power supply. I am pretty sure this
Electronics Forum | Wed Jan 27 08:31:13 EST 2016 | oxygensmd
You need to connect the MC (machine controller), SC (station controller) and the LR (line computer / linie rechner) to same network. The Siplace's network is really strange because this 3 machine will communicate together. You can give the right IPs
Electronics Forum | Sat Apr 09 01:18:34 EDT 2016 | smtsparescn
actually there will be internal damage on the cable resulting from frequent move during production,which is not visible, but in normal case either the camera or the control board or the cable has problem, Camera and control board could be repaired
Electronics Forum | Thu Nov 03 01:14:12 EDT 2016 | soniyaphilip
I am not familiar with FUJI CP4-3 machine . This makes a together package FUJI IP3 . This equipment makes a different sub equipment . I think each onne is important for data manipulation. It control the real-time production data from the MCS controll