Electronics Forum | Thu Aug 10 04:31:02 EDT 2017 | leadthree
The only people that can answer what you need is UL. I worked with VDE and I do not know any company that works like that. With VDE we prepare a module according to VDE standard and do an internal pre-approval - and present it. To put something ra
Electronics Forum | Wed Jan 17 05:58:45 EST 2018 | awelektronik
Hi Evtimov, no, i have no possibilities to change the Light. My Camera knows only on and off. The PCB-Solder resist looks in that IR-Light whyte like the CE-Symbol of the picture i post in my first message. The Pins with gold looks the same. Its an
Electronics Forum | Tue Apr 10 00:01:33 EDT 2018 | kumarank
Hi All We are running Fuji NXTs SMT lines. For each line we have a individual client PC running on windows 7 which communicates with a main server which is also running on win7. Randomly we face issue like programs are not getting downloaded on the
Electronics Forum | Thu Jan 03 15:53:28 EST 2019 | cbeneat
We did figure out the issue. The plastic cover inside the LED lighting unit had a slight film covering it, which made the picture slightly hazy. We had to disassemble the LED module to get at it, cleaned it and it was fine. I didn't think this would
Electronics Forum | Tue Nov 20 12:06:21 EST 2018 | reckless
Great explanation! In my operation I have all tiny chips, 1 SOT223 being largest part but I do have 1 3mm tall inductor which won't work with this machine. Other than 1 part I could run my entire production on it. Also looks perfect for LED produc
Electronics Forum | Tue Nov 20 12:38:07 EST 2018 | robl
NXT's are never meant to be used in isolation - I've never seen less than 3 thin modules and 1 fat together. AIMEX III uses the same heads in one chassis if you prefer contained machines. I've had lots of platforms over the years, and worked them
Electronics Forum | Mon Mar 11 06:49:42 EDT 2019 | SMTA-Bob
You problem will be related to the part type or the design. Standard 40 or 100 pin QFN or LGA parts are not going to drop due to weight as they are just a few grams. If you send a photo of the PCB pad footprint and the component separately I may be a
Electronics Forum | Wed May 22 09:18:55 EDT 2019 | emeto
Hi, from what you are saying I am not sure you need turret head. One operator means you will prefer a machine that has feeders on the front only. Remember that the machine speed has nothing to do with the number of boards you are going to produce. R
Electronics Forum | Thu Jun 20 23:28:15 EDT 2019 | SMTA-David
How can I upload image to this forum? I can show you the pad layout. I am thinking maybe too much solder. I used 0.16mm thick stencil but notice many us 0.12mm thickness. Also, cream layer is 100% of pad surface, I know for fine pitch parts it is r
Electronics Forum | Mon Jun 24 10:19:23 EDT 2019 | slthomas
I have not added images in quite some time but the "Attachments" feature below the window where you type your post will steer you through it. You just have to have the image hosted someplace that you can point to. Just for