Electronics Forum | Sat Feb 16 22:19:11 EST 2013 | mdang
Hi, I bought a fuji Flexa v4.6.0.7 and hook it hook it up with CP65 machine. The flexa system already have CP65 configure so I can see the production program on the machine and delete them but I can not transmit a new program to the machine. It error
Electronics Forum | Wed Aug 19 09:14:26 EDT 2015 | sarason
Try a more intelligent telnet program that has a few diagnostics. I dont know the Mirae machine myself but the ext thing would be to do a trace on machine operation. maybe the booting sequence has the Telnet Host( Or is it Client?) boot after the mac
Electronics Forum | Thu Jun 02 08:18:57 EDT 2016 | emeto
You have to define inexpensive. Good machine will be Juki or Samsung that cost less than Siemens, Fuji or Universal.All of them good in a different way and just like everything else, the more expensive it is the better. If these are expensive you sho
Electronics Forum | Mon Oct 09 06:04:47 EDT 2017 | bobpan
Hello Joyce, Usually I use Very Large cable ties and secure the heads in the opposite corners. I also tie up the z rods or put some plastic tube under the top portion to keep them up. Remove the monitor and bracket off the side of the machine...and i
Electronics Forum | Tue Dec 19 16:30:23 EST 2017 | charliedci
We have several selective soldering machines, that because of several minutes of process time per PCB, one operator can keep 2 or sometimes 3 machines loaded and running. Other days only 1 machine is running but operator does not have enough time to
Electronics Forum | Fri May 22 22:13:18 EDT 2020 | gabriel1blue
Hi guys we had problems with our old pick and place machines and all the parts data and mark data was lost when we had to restart the machine. We made a copy but it has been so long that we used it that now it's not working. I hope someone has one of
Electronics Forum | Sat Aug 22 16:53:32 EDT 2020 | jmelson
I'm trying to diagnose a Quad QSA-30A machine that won't go ready. I have the machine technical drawings, they have overall machine schematics and cable wiring on most of the cables, but that's all. Does anyone have access to the schematics of the
Electronics Forum | Mon Oct 24 11:04:58 EDT 2022 | richardcargill
The yamaha feeders need leader tape to function - so if you're using cut reel components you'll lose 3 or 4 just on set up alone. Run-time attrition is harder to help with as machine setup and calibration, condition of nozzles/feeders, ability of ope
Electronics Forum | Sat Apr 24 04:41:56 EDT 1999 | Murray Pulman
Dear C.K We are routinely wave soldering 0603 and sot23 on subcontract, hence we get what we are given!!. Being UK based we use a Blundell cms 400 dual wave soldering machine (made in Coventry), Tecan Stencils and Loctite 3612 adhesive. You must k
Electronics Forum | Fri Feb 05 12:52:22 EST 1999 | Jason Hall
| Anyone heard of a BGA599. I was wondering the package size of this part, and if a GSM-1 would have any problems placing it. | | Jamie Ford | I am not sure of the package size of this part but I do not see why a GSM-1 would have any problems pla
