Electronics Forum | Wed Sep 05 06:34:08 EDT 2018 | oriolsancheza
Hi Rob, Thanks for your fast response. In fact, after a better look to driver boards, it has leaking SMD Electrolityc caps. Unfortunately after replacing them in 3 units, one of them gives 90% of times, ALARM4 led ON. Looks like a comunication pro
Electronics Forum | Sun Sep 01 22:02:58 EDT 2019 | sarason
Have you got a circuit diagram for your driver board? If not measure your driver into a resistive load and look for differences in current flow voltage drops under load dried out caps. Dead current measuring circuits etc. If you see an IC, look it up
Electronics Forum | Tue May 21 13:17:47 EDT 2019 | SMTA-Thomas
2.54 μm [100 μin] gold thickness and all through-hole leads that will be hand soldered regardless of gold thickness” (we automatically solder wash all components which violate this requirement). In all cases we have attempted different no clean flux
Electronics Forum | Sun Jun 09 21:10:11 EDT 2019 | don_julio
In our reflow oven it has pins which move at the predetermined speed to move the pcb through the various zones in the oven. The forward row of pins is fixed along the front of the oven. The rear set of pins is adjustable per the width of the pcb. We
Electronics Forum | Mon Mar 23 15:08:21 EDT 2020 | slthomas
Unfortunately I didn't do the work...I just requested it from maintenance. I think the E5's were really a completely different beast than an E4, but I've never used an E4 so really don't have any experience. I purchased 3 E5's when new for a previou
Electronics Forum | Wed Nov 27 08:01:15 EST 2019 | tsvetan
Hi, Recent power blackout damaged our SONY F209 UPS ATA power supply and machine's HDD got corrupted at the same time. Power supply is replaced, but now the machine refuses to boot. The registry file for windows NT 2000 with all software installati
Electronics Forum | Fri Feb 14 16:01:28 EST 2020 | bk
On the my12 the panel on the front of the machine comes off two screws each corner to loosen the panel. There is a pull out tray that gives you easier access to the computer, ps3, etc. It will be the box in the center on top it should label where eac
Electronics Forum | Wed Mar 18 11:27:24 EDT 2020 | slthomas
I am about to order a stencil and I can already see that I'm going to have issues. I'm hoping someone has a recipe for this scenario that we haven't tried yet. The parts are 16 mil pitch bga's, the pads are NSMD (10 mil dia. with 12.6 mil mask open
Electronics Forum | Fri Apr 03 10:29:29 EDT 2020 | stephendo
Time. The virus does not last a very long time on surfaces. Not sure how long but I read that it does not live long on copper but does last on stainless steel. As far as I know the virus lives as well on gloves as it does on hands. So you still have
Electronics Forum | Tue Aug 18 16:16:36 EDT 2020 | charliedci
We have a Glenbrook Jewel Box 70T, purchased about 5 years ago, Think it was around $60K quoted price (we traded in our old Glenbrook for a discount), Software pretty basic, can store images and has some graphics and image processing capability. It h
.gif)
