Electronics Forum | Fri Sep 27 01:28:58 EDT 2019 | drew_holm
HI, we are trying to reduce the noise from an off the shelf pcb that will be used in the mri industry. We have been able to reduce quite a bit of noise using copper mesh but we still have more to go. So we think we now have to consider the board c
Electronics Forum | Thu Oct 03 10:21:30 EDT 2019 | cbart
Hello all!! we are having a heck of a time getting a TE Connector to solder TE P/N 2305018-2. the part design is terrible!! the parts tips forward and rocks side to side when mounted. we are getting many un-soldered leads. and the design does not len
Electronics Forum | Thu Apr 30 17:06:19 EDT 2020 | bboyer
So, I have inherited a couple of "vintage" GSM1 machines, and we've got one powered up, trying to see if it even works, before registering the machine and paying Universal some money. It appears several of the safety interlock switches are triggered
Electronics Forum | Wed Sep 30 21:48:13 EDT 2020 | kylehunter
> If you could change the design, a 2x25 1.27mm > pitch surface mount connector is a standard part > from Wurth. Samtec also do versions in any pin > count you might desire, with locating pins, > without, with picking clip etc.
Electronics Forum | Thu Dec 17 15:53:32 EST 2020 | dwl
for option 3, if you place the connectors on the first pass then flip the board, won't the protruding leads interfere with second pass stencil printing? My vote would be to overprint onto the solder mask. you can print pretty far and still have it w
Electronics Forum | Wed Jun 16 20:27:14 EDT 2021 | bradleycramond
Hi Guys We looking to purchase a second hand system consisting of a Juki KE-2050L and a SMT XXS reflow oven. This will be our first system and used only for our own boards. We hoping to get some opinions and insight from others that have experie
Electronics Forum | Mon Sep 27 16:52:48 EDT 2021 | aex
During production the temperatures on the last 3 zones are approx. 20F higher than the setpoint. The other zones are operating within spec. We checked power, I/O, SSR's, thermocouples, and exhaust, but the issue remains. We did not check resista
Electronics Forum | Tue May 24 07:51:43 EDT 2022 | spoiltforchoice
Doesn't exist. True Solder Paste dispensing is a Mycronic only solution with Essemtec coming behind with slightly less cpapbility. With Essemtec you can have one machine that prints and places, that saves space, with Panansonic you can have machines
Electronics Forum | Thu Dec 29 14:09:45 EST 2022 | proceng1
Your best source of parts and info for MPM machines is PPM in New Hampshire. George, who is the oracle when it comes to these printers is no longer with the company, but either Ed Sullivan or Steve Brown can probably assist you. I had a UP1500 and
Electronics Forum | Sun Oct 22 13:52:40 EDT 2023 | protokos
> This will be a problem as the calibration <BR> > settings are stored per machine in the <BR> > Application Support folder. You will also need to <BR> > know what the last firmware you were running as &l