Electronics Forum | Fri Jul 21 15:26:59 EDT 2000 | Boca
You're going in the direction of fab improvement, a great direction. But in another direction; If you're already in a carrier, how about using a skyhook of some sort to support the middle of the fab from the top side? In some cases you can put fine
Electronics Forum | Sat May 06 06:58:13 EDT 2000 | Wayne S.
Hello, I am looking for a small solder pot with a fountain or wave. I have seen mini-waves but would like to find something smaller and less expensive. Would like to dip solder wires to small bulb leads. If anyone has any suggestions please follow-
Electronics Forum | Wed Feb 14 17:16:23 EST 2001 | slthomas
From Kester's web site: "Flux cored solder wire has a limited shelf life determined by the alloy used in the wire. For alloys containing more than 70% lead, the shelf life is two years from date of manufacture. Other alloys have a shelf life of thr
Electronics Forum | Sun Mar 25 12:48:07 EST 2001 | jveloso7
I need to modify smt pcb which require numerous modifications. In stead of use multiple wires, of which would require multiple wires to the same spot. I would like to use molytabs. We used these in the microelectronic hybrids circuits and worked
Electronics Forum | Thu Jun 14 21:43:17 EDT 2001 | davef
I know this isn't what yer asking about, but this stuff is so coo [http://www.intertronics.co.uk/products/cpreleg.htm]. We just screw a U shaped tip on the iron and go!!! Preleg Inc [Rework wire # 210302] 524 Paul Morris Ave., Ste. E Englewood, FL
Electronics Forum | Tue Jun 19 18:15:22 EDT 2001 | davef
What do you mean when you say "structure"? Taking a different tact to get at an answer to the original question, if applications such as general, BGA attach, and die attach inspection require a resolution of 10 units. What would you suggest are the
Electronics Forum | Thu Dec 30 21:38:17 EST 1999 | Dave F
Judy: There's no spec. I think you need to define a minimum requirement (1 tack per inch is OK) for your purposes. Check the guidelines on http://www.circuitnet.com/ for more back ground. We just drag the tacking iron along the wire. It's faster
Electronics Forum | Mon Oct 18 08:11:49 EDT 1999 | Graham Naisbitt
20 times per hour. Lights should be behind "Georgian wired" glass rather than Ex'd' and all electrics should be hard-wired. Zone the room 1 = safest = around the coating machine and drying cupboards 1 meter from material. Zone 2 = > 1 meter away = OK
Electronics Forum | Thu Jul 15 22:40:43 EDT 1999 | Dave F
| I need a good chemical to remove the lacquer finish off of magnet wire. I know there are different kinds but I need one that really works. Any suggestions would be great. thanks in advance guys. | Jeff: Scott's correct. Buy a mechical stripper f
Electronics Forum | Mon Apr 19 07:22:11 EDT 1999 | Hunter
Dear all Considering Anti static precautions? 1-Do we need to add a layer of ...say . Epoxy for the floor in our factory? provided that .The current floor is hard top concrete of 250 Kg/cm2. 2- Anti body heared about Wire less Hand strap Some body to
