Electronics Forum | Wed Sep 09 17:36:15 EDT 2020 | waxler
I have used Kinnarney Rubber Co Inc, PO Box 37 450 Main St in the past.
Electronics Forum | Tue Sep 15 21:05:37 EDT 2020 | bmalhi
Please try to run wakeup recipe and heat up one zone at a time to see if its related to any zone or load on the facility side. Please contact Heller ServiceNJ@hellerindustries.com to get help with the issue.
Electronics Forum | Thu Sep 17 13:26:45 EDT 2020 | emeto
New factory - old oven. Something is different in power in the new place. Compare with old place and fix.
Electronics Forum | Sat Sep 19 21:50:19 EDT 2020 | davef
Use your 3D printer to make a "case" for your board that will hold the battery securely against the contacts on the board.
Electronics Forum | Tue Sep 15 18:48:47 EDT 2020 | dekhead
Why are you looking at the camera reference position frequently? This is / should be a maintenance setting. Please clarify.
Electronics Forum | Tue Sep 15 19:21:38 EDT 2020 | edvardvojvoda
Because after we set the reference point at the right place, the program is working. The problem is.. the DEK try to find the reference point at different locations, it happens mostly at changeovers and sometimes before the fiducial check. When it l
Electronics Forum | Wed Sep 23 16:25:02 EDT 2020 | dekhead
Sounds like we are not talking about the same "reference"... please contact me directly to see it I can assist. dekhead@att.net
Electronics Forum | Thu Sep 24 08:09:13 EDT 2020 | majdi4
Try to make a copy of the default programme while creating a new programme and overwrite it.. to ensure that machine paramters are the same as the default programme.
Electronics Forum | Thu Sep 17 03:36:47 EDT 2020 | SMTA-64386317
Hi All, Is there any specific control for solder height and volume? Such as 3 mil what will be the height and volume upper and lower limit?
Electronics Forum | Fri Sep 18 18:20:45 EDT 2020 | dwl
Count on Tools makes hard foam support block with magnetic bases that work really well. check with them to see if they make them for the SPV. Insert standard: I receive no benefit nor compensation from the aforementioned company.
