Electronics Forum | Tue Oct 09 11:50:44 EDT 2001 | Marc Peo
Hello Darby! Mike is correct in saying that reversing the conveyor can be done but the position of the cooling zone would be troublesome. I am guessing that you are looking at a left to right machine that you would like to run right to left or vice
Electronics Forum | Mon Oct 08 23:17:48 EDT 2001 | Brad Arnold
We are trying to produce a PC Card bus assembly with a 672 pin BGA on one side. These pcb's are .015 thick. I believe the ball pitch is .5mm. The pcb's are plated with white tin. The pcb's are in a 1 X 3 array. We had 2 plates with appropriate cutout
Electronics Forum | Fri Oct 26 11:37:27 EDT 2001 | Dave G
You could start by putting together a matrix of P/N's vs product. This will tell you which parts are common with most of your jobs. These would then become part of a fixed feeder setup that would stay on the machine. (These will probably be mostly R'
Electronics Forum | Mon Oct 29 15:58:47 EST 2001 | davef
Kitting: Buy-in material in kit form that is complete and in the proper form. Line set-up: Layout all boards to be the same width. Printer set-up: Use a dispenser, instead of a printer. Dispenser set-up: Program & debug off-line. Placement machin
Electronics Forum | Wed Oct 31 18:00:51 EST 2001 | Jonathan Mitchell
Hi All! In the near future we will begin to take on products that require a reflow process on both sides. We will run the backside first (smaller components) to reduce the chances of a part falling off during the second reflow, but my question is abo
Electronics Forum | Mon Nov 26 15:30:35 EST 2001 | jhingtgen
To all, For the benefit of everyone there will be a session conducted at APEX on this topic. I have included the information that I pasted from the APEX website (http://www.goapex.org). ADHESIVE PRINTING Chris Marinelli, Loctite Tuesday, Janua
Electronics Forum | Tue Dec 18 18:37:35 EST 2001 | Dreamsniper
Hi, Forgive me for my stupidity. Has anyone moved the fixed side of the Heller's Edge hold conveyor by 50mm ? I need infos on how they did it. This is because of the high delta T that we are getting from our oven which is between 20 to 20 deg. C from
Electronics Forum | Wed Dec 19 17:15:10 EST 2001 | davef
So, what is a �Contaval Pallet�? And who, my I ask, came-up with the cockamamie idea of retrofiting of the edge hold conveyor? Last time I checked, everything was fine, all profiles were working, etc., etc. Just think, if you move the fixed rail i
Electronics Forum | Wed Dec 19 02:24:40 EST 2001 | ianchan
Did I mention, we tried to use the same WS flux formulae to brush-cover the affected flex-PCB pads, and subject it to another round of water-wash, followed by oven-baking, and it still doesn't help abit? Oven bake : 100 deg-C, approx 15~30mins (manu
Electronics Forum | Fri Dec 28 16:42:04 EST 2001 | johnthor
While we have nowhere near the volume you do we have bent 2 A-14s in 3 years. One was definitely operator error in that a tape holder arm was left floating the other is unknown as this particular (ex)operator wouldn't admit to knowing the time of da