Electronics Forum | Thu Sep 16 20:45:51 EDT 1999 | Dave F
| We have a new custumer that needs thier thru-hole/smt boards conformally coated. We currently do not have a selective spraycoating system adn this low volume of these board do notwarrant a 100k machine. We are spending way to much time masking and
Electronics Forum | Thu Sep 16 09:29:13 EDT 1999 | Rob Jankowski
| | | Looking for a manual machine to de-panel with the panels held by 60mm tabs. Each panel hold multi-boards consisting of different shapes and sizes. Scoring is apparently not an option and volume does not dictate a large scale machine. | | | |
Electronics Forum | Thu Sep 16 09:31:05 EDT 1999 | Rob Jankowski
| | | | Looking for a manual machine to de-panel with the panels held by 60mm tabs. Each panel hold multi-boards consisting of different shapes and sizes. Scoring is apparently not an option and volume does not dictate a large scale machine. | | |
Electronics Forum | Thu Sep 16 05:04:38 EDT 1999 | Jim Mitchell
For the record, the problem was related to a bad floppy disk resulting a corrupted dll file. Microsoft Windows 98 did a poor job of recovering from a bad dll. The dll was removed, QSoft re-installed, and all is running well. Times change Earl and
Electronics Forum | Thu Sep 09 14:19:33 EDT 1999 | Doug Philbrick
| | We are currently quoting several vendors on the through hole portion of a new mixed technology production line. Unfortunately, I have not been able to find much information about NEA's cabaility, quality, or service. Any comments or references
Electronics Forum | Wed Sep 08 17:25:49 EDT 1999 | Earl Moon
| My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for m
Electronics Forum | Thu Sep 09 08:33:07 EDT 1999 | Dave F
| My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for m
Electronics Forum | Thu Sep 09 14:40:33 EDT 1999 | Doug Philbrick
| | My company is looking to perform "real time" statistical process control on our current SMT operations. I have identified the critical processes for SPC but have not had much luck in finding a system(s) that can monitor the required processes for
Electronics Forum | Thu Aug 19 04:49:09 EDT 1999 | Earl Moon
| | | We have developed a new process for removing moisture from surface mount devices. We have one site where PCB laminate drying has been reduced to 1.5 hours. A standard oven took 4 hours to do the job. I am looking for a firm who does large scale
Electronics Forum | Wed Aug 18 21:18:00 EDT 1999 | Dave F
| WE ARE CURRENTLY HAVING PROBLEMS REFLOWING BOARDS WITH WHITE TIN PLATING. WE ARE NOT GETTING GOOD WETTING ON THE PADS. | WE HAVE CHECKED THE REFLOW PROFILE AND TRIED DIFFERENT PASTE'S. | WE THINK THERE MAY BE CONTAMINATION OR OXIDATION ON THE PADS.