Electronics Forum | Tue Jul 11 12:59:26 EDT 2006 | mattkehoe@sipad.com
We are trying to apply solder to boards with 80 microinches of electro plated hard gold. No components involved, just print 63/37 paste and reflow. The results are very poor on some boards, not so bad on others? Pictures at http://www.sipad.net/thick
Electronics Forum | Thu Jul 13 13:51:13 EDT 2006 | George
I got some info about it last year. I could not justify ROI since this machine was way too expensive (same thing with Vitronics Selective machines). You need to see if this machine will increase your throughput or not depending on your products. Al
Electronics Forum | Thu Jul 20 05:04:30 EDT 2006 | bing007
We had a similar problem with gold contact pads. Cleanliness is paramount. If you are using foil tensioning system, wash the foil in a stencil wash before use as the cardboard cassettes may be contaminated. Be very careful when loading into a frame f
Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit
Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8
Electronics Forum | Mon Aug 21 10:58:34 EDT 2006 | davef
Pulsar Solder Saver: "The Solder Saver is a unique, handheld tool that scoops dross directly from the surface of the solder wave pot. The dross oxides are instantly separated from the solder using a unique high-speed rotary process system. The newly
Electronics Forum | Tue Aug 22 20:32:40 EDT 2006 | davef
Fixed position (mounted) [In-line] laser bar code scanners: * microscan 800.762.1149 info@microscan.com [Ken SMTnet] * symbol technologies symbol.com [Russ SMTnet] * Keyence and RVSI inline scanners [B Norman SMTnet] * Datalogic TC1100 bartec-systems
Electronics Forum | Thu Aug 24 16:08:18 EDT 2006 | Frank R.
Thanks Bill and Dave for your help, Sorry Dave if I didn't search for information in archives. After wave process we have 2 ICT, 2 AOI machines 4 PVA conformal coating machine that will be use on 3 different lines. The quind of automation I want to
Electronics Forum | Tue Sep 05 08:40:33 EDT 2006 | CL
SMAINTECH, Good Morning, We have installed the Gridlock tooling pin with stealth mode on our DEK's. It is a hard tooling pin array that resets the height if the pin for every board. The pin comes up until it comes into contact with something then lo
Electronics Forum | Wed Sep 20 16:01:52 EDT 2006 | jimmyjames
We recently upgraded our SMT placement equipment and are quite happy with them. One of our old SMT machines however had a glue head attached to it and we are now in the market for a standalone glue station. Our SMT placement rate is roughly 12k CPH
Electronics Forum | Mon Oct 02 11:23:04 EDT 2006 | ccapezza
EFD, Inc. manufactures adhesive dispensing equipment and may be able to offer assistance with your application. Check out our product information at http://www.efd-inc.com. We manufacture dispensing equipment ranging from manual dispensers to XYZ b
