Electronics Forum | Fri May 28 12:57:16 EDT 2021 | cbart
does it only do this with one assembly or panel config? i have seen this when the sensor shoots through a hole in the pcb/panel. the machine sees the panel come in, but it either overshoots or moves slightly into the open area. if i remember correctl
Electronics Forum | Thu Jun 03 06:14:38 EDT 2021 | bukas
Yes, most of my fiducials are 1 mm. BUT, you may consider going 1.5mm or even better 2 mm because in my experience PCB manufacturers will NOT check fiducial shape during PCB testing. This goes for fiducials that are placed on panel frame. Fiducilas t
Electronics Forum | Wed Sep 29 19:47:44 EDT 2021 | emeto
"For the lead free soldering of electronic assemblies, the inclusion of silver in the alloy results in better wetting compared to non-silver containing alloys and also allows for a broader process window. Silver also improves joint reliab
Electronics Forum | Thu Oct 14 14:11:33 EDT 2021 | SMTA-64387257
Hi All, We are currently looking to add an Xray inspection system into our process. We build high density assemblies with ultra fine pitch BGAs, 0201's, QFN's and every package type one can think of. We would like to use the inspection system to v
Electronics Forum | Fri Feb 18 20:53:36 EST 2022 | emeto
From part documentation: CLEANING INSTRUCTIONS A no clean solder system is recommended for IHLP's. If cleaning must be performed, an Isopropyl alcohol is recommended. If de-ionized Water Wash is used insure it is followed by a thorough warm air dry c
Electronics Forum | Mon Mar 07 16:15:38 EST 2022 | astarotf
Hello I am looking for positive and negative feedback on this VISCOM S3088 BASIC AOI machine. If anyone has had the opportunity to work with this machine in the field of visual inspection of electronic boards, to ensure proper SMT assembly, and knows
Electronics Forum | Thu Apr 14 14:00:44 EDT 2022 | winston_one
Also at few boards we see excessive voiding, extremily excessive. During solderind some bubbling can be observed near the soldering point. Boards was dried before assembly. May be we have a problem with too thin metallisation - that's why poor adhesi
Electronics Forum | Fri Apr 15 09:56:17 EDT 2022 | winston_one
Thank's Dennis. I'm also now think in this direction. Process was adjusted and soldering are good. But one from five boards can have this effect with bubbles and strange uneven distribution of solder inside the barrel. Probably copper is too thin and
Electronics Forum | Wed Apr 27 03:19:21 EDT 2022 | jojoled
Hi, bought older yet good JUKI machine, but can not make it work, due to lack of explanation of PWB editing details in manuals, hopefully someone can help : - what is BOC mark - how is the "PWB centering pin" normally used? - What is "Hole reference
Electronics Forum | Mon May 23 21:30:31 EDT 2022 | jojoled
I am looking for recomendation for best paste printer (or paste dispenser) whoch can inspect the solder paste after printing AND it can be used for simple 2D inspection of assembled PCB too (AOI)... I dont have space for 2 machines now , so both feat