Electronics Forum | Fri Dec 13 11:28:47 EST 2013 | island2013
I've used the DEK Vector Guard system in the past. We had three of them and we did alot of change overs. They held up really well and our stencil storage went from rack upon rack upon rack to a very small space. It was worth the money and the perf
Electronics Forum | Thu Jun 05 16:58:16 EDT 2014 | proy
I would love to use my old zevatech with a large nozzle (qfp) to pick kapton masking dots and place them on a board. I am getting some 'thicker' kapton dots to test, and need to find a way to present them, might be a trick but worth a try. Has anyon
Electronics Forum | Fri Jan 30 06:14:01 EST 2015 | philc
And there is always the argument of "get in and out quick", which is possible with high tip temps. I prefer to use a really hot iron, and do it quickly, rather than a lower temps and keep the tipi on the bit till it melts the solder. If you have a P
Electronics Forum | Thu Jan 29 11:46:40 EST 2015 | aj
Hi all, Long shot but worth a try, I am trying to identify ref: L1 Inductor which is on the back of the above mentioned cognex card ( green camera Dek GSX265 machine). Card functions fine but doesn't output any video - L1 is blown on the back whic
Electronics Forum | Thu Jan 29 15:28:53 EST 2015 | jpal
Do any of you use your AOI machines to inspect do-not-install locations? Do you look for solder bridges or stray parts in those spots? Everything I have learned and heard involves part placement and solder quality. But is it worth going that extra le
Electronics Forum | Thu Apr 09 08:22:19 EDT 2015 | bobpan
Sounds like the battery or batteries inside are dead. You can just plug the input and the output on the back of the unit into each other. The ups is not needed on the machine and was only used so that you can shut down the computer properly incase th
Electronics Forum | Fri Jan 13 09:48:27 EST 2017 | westshoredesign
10mins to print an 8mm wheel. Experimenting with both Ninja Flex, and Ninja Semi-Flex, I think the Flex is probably going to be the winner though. Had to upgrade our filament feeder on the printer to use either of them. Totally worth it though. Not s
Electronics Forum | Mon Mar 13 14:25:11 EDT 2017 | claytoneh
A dispensing glue machine that you > recommend? > > Currrently I am using a DEK 03iX > for this operation, but cycle time is too slow, > so I am looking for a glue dispensing machine, > fast and with very good accuracy. The fastest that I have
Electronics Forum | Thu May 04 14:33:26 EDT 2017 | sumote
If you are doing contract manufacturing you may need to get permission, or at least disclose the foreign material you are introducing into the solder bath. I looked at it and decided the potential problems it could cause were not worth the time it wo
Electronics Forum | Fri Dec 01 13:55:44 EST 2017 | emeto
Brikainis, it looks like these vias are not plated and closed. I would say that thickness of your paste is lifting the part. Are you willing to try another stencil with ground pad apertures matching the via holes? It is probably worth trying. Anothe
.gif)
winsouce.jpg)