Electronics Forum | Wed Jan 28 15:42:26 EST 1998 | Anonyous
| Anybody have one of these machines feel free to call or email me | Mike Cox | 1-208-887-1000 | MCCOX94@AOL.COM | Thanks for your help You should really consider buying a Siemens Siplace machine. They are much better and service/support is excellent
Electronics Forum | Fri Aug 03 16:58:58 EDT 2001 | davef
What do yall do to control the configuration of placement programs written for a specific product? We always just ran what was on the machine, If the first piece looked good, we ran it. If the first piece looked bad, we fixed and then ran it. Now
Electronics Forum | Fri Sep 07 13:44:23 EDT 2001 | Hussman
Wut-chuw talkin' 'bout Carol? Are you talking about an aqueous wash machine to clean your boards? Well then, I've always liked Electroverts machines. They're modular and seem to do the job well. It all depends on your boards and your process.
Electronics Forum | Mon Sep 10 16:07:37 EDT 2001 | johnw
Hi guys HELP!!!!!!!!!! I have been tasked with working out a chart to show calibration acCuracy and that my machines are in control I say to myself I know they are cause I have no misplacement of fine pitch but this is not good enough for my co
Electronics Forum | Tue Oct 30 08:55:54 EST 2001 | Stefan Witte
Chris, I should have read your request more carefully. .010" glue dot diameter would require at least .005" needle diameter. No way you can do it with the above mentioned machines. You are already stretching the capability of glue machines for 0402 c
Electronics Forum | Tue Jan 08 14:51:11 EST 2002 | edmentzer
The only time we had this problem was when the operator let the mount tool test position on the board be a mounting hole so the machine did not know where the board top was. You might want to check the mount tool position as a lot of PCB CAD people
Electronics Forum | Thu Jan 03 22:39:37 EST 2002 | davef
For us, it depends on product volume: * Low volume: Tailor's scissors sharpened for the job. * Mid volume: Custom die used in a press. * High volume: We don't do this, but we'd have buy a singulation machine, er something like that. [Search the SMTne
Electronics Forum | Wed Jan 09 17:18:25 EST 2002 | pjc
Mydata, of Sweden, offers one of the best entry level placement machines that are high-tech. and very easy to program, operate and maintain. Perfect for the new user. They have excellent service and support in Europe. www.mydata.se For adhesive curin
Electronics Forum | Mon Feb 25 17:07:15 EST 2002 | peterson
We are using a Panasonic MPAV2 to place some QFP's. Can someone please help me with a problem we are having with coplanarity! The machine is "dropping" parts due to coplanarity issues. What settings should we be looking at in order to eliminate the
Electronics Forum | Tue Mar 05 03:13:52 EST 2002 | rkey
hi, yes i know those machine'a are made by YAMAHA !! Philips sels them under a different name. i know this machine (PHILIPS, YAMAHA) uses UFO's and BRD Files! It would be great sending us the software including the manuals! Thnx alot pal. Best rega
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477