Electronics Forum | Fri Jul 24 13:43:15 EDT 2009 | thanhnguyen
Yes, it was a relay that control lid up or down.it fixed now. thanks
Electronics Forum | Sat Jan 18 08:49:17 EST 2014 | emeto
The voltage is too high. I would check all the solid state relays.
Electronics Forum | Mon Mar 16 13:22:25 EDT 2015 | akyzum
Oven is not turning on. No heat. Can hear relays clicking. Any help would be kind.....
Electronics Forum | Tue Jul 26 09:50:21 EDT 2016 | leeg
Could it be the safety relay?
Electronics Forum | Thu Aug 18 00:19:09 EDT 2016 | souldierann
Hi there. would it be possible that thermal relief pads for relay bring bad solder?
Electronics Forum | Thu Nov 03 13:28:48 EDT 2016 | jimmyboz
If there are no errors, check main relay contacts, it is common that one contact is not closing.
Electronics Forum | Mon May 10 18:05:31 EDT 2004 | daman
We are trying to solder a Surface mount relay having lead free finish on the leads. The leads are not getting soldered down during the reflow. The leads also look oxidized (failed our solderability test) but we don't have an option but to use these r
Electronics Forum | Fri Jul 24 11:56:24 EDT 2009 | stepheniii
I've had the relay that controls closing the lid go bad It's a solid state relay if I remember correctly. Are you talking about a motor driven lid? edit now I"m trying to remember if that place had conceptronic ovens and that's what I"m thinking of
Electronics Forum | Fri Jan 03 15:10:49 EST 2014 | jimmyboz
SET-MANUAL-IO Thermal alarm can be an overload relay, vacuum pump for nozzles or scrap vacuum. It may also be overtemp from the cam box "oil" temp. The 2 overload relays have reset buttons, press and try to feel for a "click". If it is directly t
Electronics Forum | Tue Jul 29 14:25:20 EDT 2014 | kenkay
We have been struggling for a while with some through hole sealed mechanical relays that fail at test after they have been sitting a while. They will initially pass test, but seem to fail if they sit for a few days. We made sure our wave process was
