Electronics Forum | Mon Jun 07 15:33:08 EDT 2010 | bderks
Hi, I'm working at a very small electronics assembly firm and we need to get a better thermal profile of our reflow and solder wave ovens. Our firm is part of a larger firm that was set up to help handicapped people find work in the Netherlands. Yo
Electronics Forum | Tue Mar 20 08:04:47 EDT 2018 | spoiltforchoice
Those of us doing low volume with mesh ovens and double sided boards will often use the titanium strips used for making boards more rigid for wave soldering. Gives you enough clearance for lower profile items that you would typically find on the firs
Electronics Forum | Wed Apr 12 20:41:31 EDT 2000 | Dave F
Russ: That�s a pretty stand-up postin� bud. It�s neat that you can root-out that dirt. We couldn�t dig-up that stuff, if they threatened to shoot the dog. You could be correct about using convex for waving. We don�t wave RNET as Philips suggests
Electronics Forum | Tue Aug 24 22:32:18 EDT 2004 | pdeuel
We have a Soltec Deltawave with single nozzle spray fluxer, chipwave, and waveform. It preforms well. I am not fimilar with Electrovert models so I can only give you some of the pitch I got when I went back East for training. Features I like about th
Electronics Forum | Tue Mar 23 10:16:22 EST 1999 | Chrys Shea
| Hi Folks, | This is my first surface mount board, so I asked our assembly house for some tips. They said only passives on the bottom side-preferably no smaller than 0805, 0603 only if I have to. I would think that an SOT-23 would be OK on the botto
Electronics Forum | Fri Oct 23 16:01:18 EDT 1998 | Earl Moon
| I need some info on how to stop the bridges I'm having on | radial and axial parts that are in the same place on every board. I'm also having problems with sot-25 bridging. I'm using a Electrovert E-pak. I tried leveling the machine,solder pot, an
Electronics Forum | Tue Dec 29 04:27:08 EST 1998 | John W
| I have an inbteresting problem on my N2 wave soldering lines. | We have two N2 wave soldering line. Line A is old one and Line B is new. | We found solder balling Phenomenon on PCB After soldering in the new N2 Atmosphere Wave Soldering Machine. In
Electronics Forum | Thu Mar 01 16:43:59 EST 2007 | samir
My own personal "unwritten rule" has always been - no more that 3 times. Anymore than once, I'm not sure what the implications are. If you think about the mechanics of wave solder. It's around 200 Deg. F of preheat, and then immersed in 480 to 500
Electronics Forum | Tue Jul 11 15:59:52 EDT 2000 | JohnW
George, I looked at the winkic & profit software and tool's a while ago along with some of the alternatives. No matter what anyone tell's you in the 1st instance you do still need a profile card as what you are doing is comparing the known good prof
Electronics Forum | Sat Aug 28 14:16:18 EDT 1999 | JohnW
Doug, Have you tried running the boards at an angle to the wave of between 15 - 30 degree's ? I've done this on a few boards to eliminate short's and I believe it will work on your problem very sucessfully. Best thing to do is get your wave solder c
