Electronics Forum | Fri Feb 11 14:32:44 EST 2000 | Ashok Dhawan
I am looking for a Masking tape for Gold fingers on a PCB . It should not leave any residue on reflow soldering ( 220 deg c). Currently, I am using Kapton tape with Silicon adhesive. It is leaving minute quantities of residue? The fingers are al
Electronics Forum | Tue Apr 11 16:11:06 EDT 2000 | John Thorup
Hello Ashok I can't recall mask damage through normal handling that did not have an adhesion or cure problem as its root cause. Most of our boards arrive shrink packed in groups of 10. We simply pop off the wrap one pack at a time and leave them in
Electronics Forum | Fri Mar 24 13:02:53 EST 2000 | Ashok Dhawan
Two questions on ESD: 1. What is recommended method ( Air ionizer , grounding strip etc. ) for a board prep ? We Kapton Tape for masking pads or not to be soldered areas. or Is there a wet mask recommended for masking boards campatible with NC Sold
Electronics Forum | Wed Feb 28 09:53:17 EST 2001 | fkurisu
Hello Dave, Solder mask rework has been performed on both bare and populated boards. There are factors that come into play with a populated board that make this type of rework more difficult, such as the density of components(especially around th
Electronics Forum | Sun Jan 23 03:23:09 EST 2000 | Rob Steltman
Hi We use a U-channel piece of high temperature silicon which is just pushed over the gold tabs before the soldering process. The silicon can be used over and over again. The advantages are that there is no mask on the board during the SMT process a
Electronics Forum | Thu Sep 16 09:07:20 EDT 1999 | Chris McDonald
We have a new custumer that needs thier thru-hole/smt boards conformally coated. We currently do not have a selective spraycoating system adn this low volume of these board do notwarrant a 100k machine. We are spending way to much time masking and un
Electronics Forum | Thu Nov 12 10:05:05 EST 1998 | Doug Clement
| | I have a need to dispense a latex masking material using an automated dispensing system. We are presently looking at the I&J750. Does anyone have any experience with this piece of equipment, or have a better solution available? | | | Doug: Fi
Electronics Forum | Thu Jun 11 09:01:02 EDT 1998 | Dave F
| We have dispensed latex peelable solder mask, but want to begin printing. | What are your experiences with: | 1 Mask types ... latex versus vinyl? We're edging towards vinyl | 2 Stencil or screen? We're aiming towards stencil | 3 Metal or plas
Electronics Forum | Fri Apr 17 14:12:27 EDT 1998 | Earl Moon
| Is there anybody to help me ? | We have small balls appearing on the boards soldered by | wave soldering machine and it looks that use of nitrogen | is linked to the problem (because without nitrogen, we have no more | problems). | That remind you
Electronics Forum | Fri Oct 12 14:19:03 EDT 2001 | David Brink
Steve Often solder mask is the only solution but in many cases there is enought space between smt and thru-hole to utilize a component masking wave solder pallet. The advantage to a pallet is consistancy of results and excellent protection of masked