Electronics Forum | Tue Mar 30 02:58:55 EST 2004 | Grant Petty
Hi, Thanks for the ideas. With the solder mask curing problems, can you normally wipe off the white residue, as we can do this on our boards with our fingers. It's almost like the surface of the board has a "wet dried up" look to it, and it's a smok
Electronics Forum | Tue Mar 23 20:55:00 EST 2004 | Dreamsniper
First Time to solder BGA's using Water Soluble. We are currently using an Aquaeous Cleaner to clean our PCB's but I find it not enough to clean the flux from under our BGA's. Has anyone had this experience before that he may like to share how he mana
Electronics Forum | Mon Mar 29 10:15:27 EST 2004 | caldon
Hi Eric- Something I have been thining about trying are Pressurex indicators. Just type in Pressurex to get the info. http://www.sensorprod.com/pressurex.html Has a data sheet available for down load. I have not used this method/Theory but would like
Electronics Forum | Wed Mar 31 21:02:53 EST 2004 | darburch
If you find your self interested in an electrovert machine we have a UP600 for sale, a good machine if you have experience with electrovert. As for a buying guide I'm not sure if there is a reliable source who has compared the different models.
Electronics Forum | Thu Apr 01 14:41:39 EST 2004 | azdback
Make sure that the image of the component in matches the way the actual part is on the feeder. To do this just go to your feeder status on the production screen, then click on the feeder that you want, in this case the one that has the sot-63 and now
Electronics Forum | Mon Apr 12 07:50:21 EDT 2004 | wgaffubar
We use a dish washer system with good success. The only issue is foaming, sometimes this can be a problem. We have be experimenting with antifoaming chemicals. Some success. I would suggest a dish washer system that has ionic system in the wash pump
Electronics Forum | Thu Apr 22 12:54:28 EDT 2004 | Chris Lampron
Hi Indy, Loctite has a product called 7360 for cleaning uncured epoxies. We had a similar problem and then found out that the alcohol actually caused the epoxy to start setting making it impossible to clean. We now spray with 7360, wipe off with dry
Electronics Forum | Tue May 11 12:23:40 EDT 2004 | Mark
Just wondering about feeders 8x2 with .7 nozzles and cover. Wondering if anyone that reads this has any extra feeders for sale or know of a house with some for sale? Got some 0402 coming my way and we only have 8x4 with 1.3 covers and 1.0 covers.
Electronics Forum | Tue May 11 17:50:41 EDT 2004 | longpham246
Just wondering about feeders 8x2 with .7 nozzles > and cover. Wondering if anyone that reads this > has any extra feeders for sale or know of a house > with some for sale? Got some 0402 coming my way > and we only have 8x4 with 1.3 covers and 1.0
Electronics Forum | Fri Apr 30 15:11:53 EDT 2004 | pjc
MPM has a new board support system called GelFlex. It can be used on UltraPrint 2000 machines as well as AP series, UP1500 and AccuFlex models. For more info, go to http://www.speedlinetech.com/mpm/gel-flex.aspx also, contact Chris Wild at Speedline