Electronics Forum | Mon Apr 07 04:33:43 EDT 2003 | Neil
Iman, How long after washing the boards do you process them? Are there any vias or Micro vias on any of the pads you see the blow holes on? A possible cause of a blow hole in a solder fillet or PCB is the escaping of Moisture under extreme temps. Th
Electronics Forum | Fri Mar 28 13:12:10 EST 2003 | barryg
We are going to be using a no-clean paste (smt)and no clean wave solder flux on a small pcb we will be doing here soon. As far as the wave process, should i purchase a new fluxer stone for the no-clean. Should I also purchse the recommended thinner o
Electronics Forum | Fri Mar 28 21:43:57 EST 2003 | MA/NY DDave
Hi Yes to your stone question. This pretty much goes with any flux change. Yes to the proper solvent for the flux you choose. Check with the Kester Data Sheets. Kester should have some application sheets which include some No-Clean information.
Electronics Forum | Fri Mar 28 21:54:54 EST 2003 | MA/NY DDave
Hi Notice they do call out that you should use their thinner. In the MSDS you get a clue as to the thinner they are mostly using with some additives. http://www.kester.com/PDF%20FILES/PDF%20Data%20Sheets/E%20No-Clean%20Fluxes/951%20(30Mar98)logo.p
Electronics Forum | Sat Mar 29 08:50:30 EST 2003 | davef
Barry Echoing an earlier poster, replace your stone. Use the suppliers' recommended thinner. Do NOT use isopropanol [IPA]. IPA contains water. Water is the bane of low residue soldering. It will get you in trouble fast. From IPC, get your hand
Electronics Forum | Tue Apr 01 15:49:03 EST 2003 | jonfox
Do you currently use any type of MRP system(s) in-house? That is how we have ours setup. Automatically generates a work order for our maintenace department depending on which PM is due (weekly, monthly, yearly). Works really well, and it requires
Electronics Forum | Mon Apr 14 03:01:29 EDT 2003 | Sean Rasmussen
SSnow, Have you used the Guru CMMS? It has many powerful features such as a powerful maintenance scheduler, inventory management, asset management, and more. It should more than satisfy your needs (as well as you can download it for free!) You ca
Electronics Forum | Wed Apr 02 11:42:28 EST 2003 | ricardof
Hi, we are using coplanarity chek systems on FUJI IP. I understand on a rough standpoint that basically this system is a GO - NO GO filter.But I would like to know if there are any options to have other results (Analytical results) with that option o
Electronics Forum | Thu Apr 03 11:36:54 EST 2003 | stefwitt
I don't know too much about Fuji, but I'll try myself anyhow. How is the coplanarity unit communicating with the machine controller? Attach a logic analyser, second listener or data analyser and "listen" to the communication with the machine contro
Electronics Forum | Fri Apr 04 16:56:50 EST 2003 | RicardoF
Thankyou Stefan, somehow the Laser sensor and controller are addresed to the IP, but it seems the results are simple as an OK or some codes when the part is out of specs, those codes appears on the monitor in the machine just for a while, likely the
