Electronics Forum | Thu Nov 08 12:50:22 EST 2012 | jmartens1978
I have a project that I am working on and would like some input from anyone that has some knowledge on High Voltage Arcing on PCBs. Problem: I have a PCB that is enclosed in a plastic enclosure that has metal pins and switch that extend to the outs
Electronics Forum | Fri Feb 01 08:11:43 EST 2013 | bdamico
Hello Phase1, Depending upon where you purchased your system, chances are that you are running a very old version of software and that the MIL library is also out of date. This will have a big impact on the functionality of your MIRTEC machine. I t
Electronics Forum | Wed Feb 13 09:04:33 EST 2013 | rgduval
Thanks, Dave. One thing that's beginning to concern me about the tankless heaters is their capabilities to get the water to the right temperature, at the right flow rate. It would be too easy to know the actual flow rate of the wash machine I bou
Electronics Forum | Sat Jun 01 11:15:34 EDT 2013 | aemery
Delete the program and start over. I can't get a clear understanding the way you described the error, but it does sound like you have some kind of detent issue or a board stop programming issue. Depending on the configuration of your machine and th
Electronics Forum | Wed Nov 19 15:48:48 EST 2014 | gregp
Thank You Adam...this is the type of input I am looking for. To summarize, you are an OEM that has gone through the process to remove most through hole parts from your assemblies. Those that remain are primarily connectors which may not require lea
Electronics Forum | Fri Jan 23 12:34:28 EST 2015 | dyoungquist
Our nitrogen generator and an air drying unit came with the selective solder machine when it was purchased new in 2008 as a package deal. We originally were feeding the system with air that was not properly dried. That lead to some maintenance cost
Electronics Forum | Tue Apr 21 02:28:54 EDT 2015 | dinhhuunam
Juki GL-1.... Any thoughts? I'm New to the > industry and I'm trying to buy a new screen > printer. I have two in mind, DEK and Juki. Hi Sir, I'll advise you the SJ INNOTECH Vision Screen printer Best Solution & Service for You Model HP-520S Hi
Electronics Forum | Tue May 12 14:07:34 EDT 2015 | joecurran
Hello g, I was alerted to your post by our marketing team. Yes, the Automove can run Fluidmove for Windows XP but only if the system does not have a downward looking camera and only if greater than serial number 3812. If it has a camera then the P
Electronics Forum | Fri Nov 06 15:42:58 EST 2015 | sdmideas
I am having a darn hard time getting my upward vision to successfully inspect a ssop14 package. I have created a part profile as defined by the manual as I understand. I believe the profile is ok based on comparison to like parts referenced in the q
Electronics Forum | Fri Nov 20 00:16:24 EST 2015 | bwetman
Hyperterminal is a standard Windows assessory located in the "Communications" folder.Here are some steps of data received through the hyperterminal in the PC. (1)Connect your device with your system through RS-232 cable or USB-to-Serial adapter and c
