Electronics Forum | Fri Oct 01 16:12:00 EDT 2004 | palmerg
As long as they're good. Have you guys had any free "help" from so called engineers that turned into a costly waste of time (both in resources and line down). I have heard some real horror stories from former co-workers. I haven't heard this about th
Electronics Forum | Fri Oct 01 16:21:15 EDT 2004 | sarah104
I second that one Glenn. I have had really solid support from my paste company. Our guy is Kevin with Aimsolder. He is quick to respond and very knowledgable. We used a cheaper paste a while back, but never ever got any support. I wont make that mist
Electronics Forum | Sun Sep 26 21:41:36 EDT 2004 | mark_h
Hi All Thanks for your interesting replies :) At this stage I feel that we are leaning towards a second hand DEK 265 GSX vs a new EKRA E4 or X4, and with the saving made we will get it well refurbish and add a board loader, and hopefully a proflow
Electronics Forum | Fri Oct 01 13:14:10 EDT 2004 | dorklover664
The MPM's are the Yugo's. You can fix anything on it with duck tape and a rubber band. I would go with the DEK. They are user friendly and reliable. Just make sure that if you are running double-sided boards to look into good push-up pins. They have
Electronics Forum | Fri Sep 24 04:57:22 EDT 2004 | FengAng
So many people have concerns on the MSD(moisture sensitive device), but I want to know if anybody can SHARE me some information about the TSD(temperature sensitive device). And I think there are also a lot of knowledges need us to learn. In my opini
Electronics Forum | Fri Sep 24 14:05:06 EDT 2004 | jsloot
Is there anyone using a QUAD QSA-30? I am experiencing problems with the Y axis drifting in the positive direction. This can occur anytime from a few minutes to several hours after the problem has been fixed. Fixed means recreating a program from scr
Electronics Forum | Mon Sep 27 10:49:51 EDT 2004 | marc
Gary Getting the specs for a used machine will be tough from Ersa but at least send them a note, the seller should also be able to get the info for you. In regards a 5 zone system. I would suggest at least 7+ zones if your moving to lead free.
Electronics Forum | Tue Oct 05 06:41:14 EDT 2004 | ilona
Hi Gary, send me your email adress, and I send you all the specs you want....I am from ERSA in Germany....you won't have a sales pitch at all. You can also contact egrice@ersainc.com for the info and a pitchless repsonse. We are not as unresponsive
Electronics Forum | Mon Sep 27 10:45:19 EDT 2004 | JDumont
Morning all, Can anyone recommend a simple low cost method to spray apply conformal coating to our PCB's. Looking for something simple, semi-automatic, and repeatable for operators to use without problems. This is a very low volume application, appro
Electronics Forum | Mon Sep 27 20:00:24 EDT 2004 | davef
We agree with Hoss. Dipping is far more controllable and less expensive than spraying for the casual user. An alternative to consider contracting your coating requirements. Amoung the service providers are: * http://www.newenglandcoating.net * htt
