Electronics Forum | Thu Feb 01 09:46:54 EST 2007 | blnorman
Especially VCM - volatile condensable materials. Strictly verboten around optics.
Electronics Forum | Tue Jan 30 14:12:12 EST 2007 | blnorman
We use nothing but silicones and have for at least the last 7 years. We don't have relays, but we do have motors. No issues with soldering, but our lines are constructed such that the last solder operation is a good distance from the coating or pot
Electronics Forum | Fri Jan 26 16:47:35 EST 2007 | electronhose
IMHO I would avoid sprayed silicones like the plague. They can travel around your facility and cause solder wetting issues that you will never know the root cause for. Also found this e-drive article on using silicones around motors and relays. Loo
Electronics Forum | Wed Jan 31 17:01:34 EST 2007 | rw
I'm not that concerned about the solderability of the motor. Our customer is concerned about the outgassing of the conformal coat effecting the motor brushes. Silicone will break down into SiO2 and SiC will result from a spark between the brushes a
Electronics Forum | Thu Aug 18 13:11:39 EDT 2005 | jsloot
We have our board house apply a peel coat mask that can be brushed off after wave or reflow. You need to brush off while it's still warm.
Electronics Forum | Tue Jan 30 18:34:56 EST 2007 | realchunks
Hose and/or Dave, Please elaborate of how the silicone can affect soldering. Material itself or fumes?
Electronics Forum | Thu Feb 01 08:47:07 EST 2007 | davef
NASA is concerned about outgassing in high-vacuum environments. They select materials to minimize outgassing. http://outgassing.nasa.gov/og_desc.html
Electronics Forum | Thu Jun 19 14:26:38 EDT 2008 | realchunks
Por-15 paint. Just don't get it on your skin or any surface you don't want coated. http://www.vintageagain.com/index.php/
Electronics Forum | Mon Aug 14 05:45:16 EDT 2023 | dimamalin
First, this is the result of bad printer setup. Adjust knife pressure, PCB gap, separation speed, tooling, and stencil cleaning. Pay attention to the coating of contacts pad and height of solder mask of PCB.
Electronics Forum | Fri Feb 02 08:36:14 EST 2007 | CK Flip
Wow, I cut first cut my teeth in the Industrial motor control industry. My 1st company made motor control products like variable speed drives, solid state overload relays, soft starts, etc. and in our shop, we used nothing BUT Dow Corning silicone p
