Electronics Forum | Thu Oct 05 16:45:19 EDT 2006 | realchunks
Wow, I'd have to say the exact opposite. Compared to MPM the DEKs were WAY longer to program. But find out for yourself CN. Program each and get back to us. Don't forget to program in 2D as well. That will be the kicker! As for spending money,
Electronics Forum | Thu Feb 15 14:51:39 EST 2007 | nitro
We have five 1997 DEK 265LTs, and we have never had to have the stencil house blacken any fiducials. The fiducials are etched about halfway through the stencil. You can adjust the lighting in each individual program, not just a global lighting change
Electronics Forum | Mon Oct 09 14:30:44 EDT 2006 | Brian
I agree with Chunks. Programming was much simpler. The 2D inspection is much better on MPM. I didn't have to use offsets on the MPM or the DEK very often, but did more on teh DEK. I didn't like the front justified stencils on the DEK. I also did
Electronics Forum | Wed Nov 20 12:56:58 EST 2002 | jasper
In my opinion MPM is superior as far as programming the 2D inspection. It's fast, simple and reliable. The DEK has options like Formflex. The MPM only offers adjustable vacuum box. It's difficult. 2nd hand prices are not similar. We offer used/refurb
Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin
I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not
Electronics Forum | Thu May 23 12:27:19 EDT 2019 | weglimir
Hello I have problem with card: VPM-5238D - Namely when printer starts, and DEK program initializes, it hangs for a while on "Downloading vision system" and then following error appears: "Vision Hardware Error - FATAL ERROR - REINITALIZE MACHINE" "
Electronics Forum | Tue Jul 13 14:03:33 EDT 1999 | Earl Moon
| We are looking to automate the paste printing portion of our SMT process. We are looking at used equipment from DEK and MPM from 1994 onward.(DEK 260 & 265 MPM AP20 & AP27) Does anyone have some feedback or concerns with any of these machines? Does
Electronics Forum | Fri Mar 20 02:10:03 EDT 2020 | weglimir
Hi Printer is DEK265GS if I remember correctly. It is definitely not a programing problem, I have 15 different screens which I've checked and all are working fine. It is also not a problem with Y shift, as I've compensated it with CUSTOM SCREEN o
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Fri Oct 06 14:54:30 EDT 2006 | Cmiller
I believe the early UP3000's had some significant mechanical issues. We have 3 UP3000 Ultraflex machines. We bought them used. These are great machines and easy to program but you need to have operators that really understand the machine. I dont thin
