Electronics Forum | Fri Dec 21 00:06:55 EST 2007 | nhantruong
If you want to use fuji CP6 machine, you have to buy the the fuji flexa software.Because the old software from fuji (MCS or F4G) they are not support anymore. In the flexa software you can make top and bottom side in the same program, you can move th
Electronics Forum | Mon Dec 17 09:15:57 EST 2007 | kpm135
I have personally worked with MYData, Quad, and Panasonic in the past. We are a High Mix, Low Volume CM. The plan that is in the works is to use the CP6 to place all chip components and then use our MYData TP9 or MY12 to place the rest of the compone
Electronics Forum | Tue Jul 14 08:09:42 EDT 2009 | fujiphil
Check the following: 1. Cam Motor cooling fan. Check if the fan is running or not. Clean the cooling fan cover. 2. Check the oil coolant control box. Check all the contactors does not trip. 3. Check the circuit protector M1CP8, M1CP9 and M1CP10. One
Electronics Forum | Fri Jul 17 19:43:20 EDT 2009 | fujiphil
Have you eliminated the hardware N.G.? Check the connection for the rear door. If the connection are ok, try to bypass the key. short the two wires for the rear door. If the rear door problem is corrected, check the rear door switch physically. Reg
Electronics Forum | Fri Dec 14 18:32:39 EST 2007 | kroberson
What machines have you worked with previously? Depending on the programming software used, CP6 can be relativly easy to program. CP6 has been a workhorse in the industry for a long time. One the process is set up, maintain the machines acording t
Electronics Forum | Thu Jan 31 16:49:10 EST 2008 | jwolvans
Hey, and guess what? A CP6-4000 will do the same thing. Fuji hasn't changed that technology one iota since the CP3 days.
Electronics Forum | Fri May 30 09:50:04 EDT 2008 | jdengler
Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry
Electronics Forum | Fri May 30 09:53:19 EDT 2008 | cyber_wolf
"Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry " Thats what I meant when I said they
Electronics Forum | Fri May 30 11:58:16 EDT 2008 | fredc
The right paper incorrectly applied can be a problem also. I have seen it on even new Fuji nozzles with the illumination disk bunched up on one side of the tube with a gap on the opposite side.
Electronics Forum | Sun Jan 20 14:04:49 EST 2002 | cstech
We have a CP6 5000, please kindly inform us the optimal tact time is 0.09 or 0.12. Kindly confirm us the CP65 is same or different to CP6-5000. The CP6-4000 and CP6-500, any different, except on the table size? Hope to recieve your help?!
.gif)
