Electronics Forum | Mon Feb 20 07:59:50 EST 2006 | dpmilk
We saw something like this in the machine shop > years ago. Fumes from a soldering operation in > the shop turned exposed iron and steel tools and > the spindle on my Bridgport mill green. Can your > supplier apply plating or a coating to the >
Electronics Forum | Mon Feb 20 08:25:13 EST 2006 | Rob
No problem. If you get no joy you're going to have to change the footprint to a 1206 or 1210. Murata have a range of high Q value inductors (50-60) & from memory Toko used to be pretty hot too. The terminations on the coilcraft part are listed a
Electronics Forum | Mon Nov 04 13:10:20 EST 2013 | pradeep_selec
Hi, We have an issue of 0805package Inductor falling apart from the circuit. We are not sure about the cause for the same so I would like to get suggestions from those who can share their experience / expertise. Is the pad requirement different for t
Electronics Forum | Thu Dec 17 06:22:37 EST 2015 | sarason
AN inductor probably 22uH 5A. Check a TDK catalogue http://en.tdk.eu/inductors Another approach is identify the power control IC next to it and look up the App note associated with it, 9 times out of 10 it will be the same as recommended. Are you s
Electronics Forum | Sun Nov 10 16:07:31 EST 2013 | davef
First, require use of the IPC-7351B Standard as the sole basis for laying-out pads on circuit boards. Second, if someone wants to use a pad design that either: * Wasn't covered in IPC-7351B ... OR * Was for a component that was in the standard but
Electronics Forum | Tue Oct 06 14:25:51 EDT 2020 | philc
Plenty of 0805 inductors around, up to 470mH, but nothing that is 26mH. Coilcraft do 23.5mH or 29mH - see https://www.coilcraft.com/getmedia/18dd250a-2b92-4f9a-bcee-3624995acc0f/0302cs.pdf Eaton do a 27mH 0805 - see https://www.eaton.com/content/dam
Electronics Forum | Wed Aug 01 02:17:00 EDT 2001 | djarvis
Anyone placing micro,mini,midi spring inductors (as can be seen on http://www.coilcraft.com) with an FV7100? I can get the little suckers to "test" all day long, but soon as I go into production mode the vision system rejects around 20%. I've tried c
Electronics Forum | Thu Aug 07 10:02:10 EDT 2008 | eyalg
We are facing low quality due to soldering opens with coilcraft inductors 0402CS-2N7XGLW. The termination used is(suffix L =RoHS compliant silver-palladium-platinum-glass frit. Did anyone had this problem in the past? Can we do better using T = RoH
Electronics Forum | Mon Mar 09 09:59:52 EST 1998 | Olivier de Brouwer
What is the expected of soldering chip inductors directly over chip capacitors. What is the expected life reduction in the field and what could be done to minimize it ?
Electronics Forum | Tue Mar 10 09:10:23 EST 1998 | Olivier de Brouwer
| What is the expected reliability of soldering chip inductors directly over chip capacitors. What is the expected life reduction in the field and what could be done to minimize it ?
