Electronics Forum | Sat Jun 08 07:23:20 EDT 2019 | bane016
Hello everyone, I have problem with 2d code. Must to improve quality of 2d. Have someone some pdf or manual for this machine? Thank you.
Electronics Forum | Mon Jun 10 10:58:05 EDT 2019 | astrid
Please let us know your company name and contact information and we will contact you. Or you can call 770 246 9706 or support-amercias@asys-group.com.
Electronics Forum | Thu Oct 03 15:46:15 EDT 2019 | compit
I have instructions "Manual CSM / GEM Illuminations Units" and "Manual Illumination System X-series" if it helps you ...
Electronics Forum | Sat Apr 03 16:39:15 EST 2004 | stefwitt
We had a similar system on the Siemens machines, quite some time ago. However, it was not a laser light but a LED and a fiber cable. Actually the center fiber or receiver was surrounded by a bundle of small fibers for the LED light source. You may al
Electronics Forum | Fri Dec 09 10:40:10 EST 2005 | patrickbruneel
Jim, I don't have direct experience with the methods you mentioned but we have used induction heating in the past and is a very effective way to heat up metals quick. This method is also very easy to automate. I did a quick search as example http://
Electronics Forum | Tue Apr 11 22:28:43 EDT 2017 | dorado
Hi Rob, Thanks for the response. I am not aware > of any feeder crashes. We aren't real sure where > the scratches came from. They do not appear to > be too deep but are at the edge of acceptable. We > are still up and running. > > I don't think
Electronics Forum | Sat Apr 03 19:58:53 EST 2004 | Ken
I have used tooling holes and fiucial registration since the late '80's. In fact if your maximum "vision" tolerance is +/- 0.05mm, your in the same ball-park as locating pins. It is true that fiducial registration is more accurate. However, I woul
Electronics Forum | Fri Dec 01 14:57:25 EST 2017 | darby
Hi Jeff, Glad to see you are still around. The two S's were my first port of call....you know how hard it is to knock new information into my head. Apparently there is no visual indication. They've suggested cleaning the unit with ISO etc but I think
Electronics Forum | Fri Apr 02 09:50:40 EST 2004 | cedams
Yup. It was definitely checking the fiducials as well as the block skip marks and it used to work pretty well. What it did was started at the center of where the fiducial should be and scanned left. When it found a change in contrast it scanned righ
Electronics Forum | Fri Apr 02 16:45:29 EST 2004 | cedams
Ken, You'd think so but the tooling pins only register to the drilling process for the PCB. The fiducial registers to the copper pattern and for both glueing and placing SMT components the pads are more important than the holes. That's why the machi
Focusing on the SMT field for more than 18 years, kinds of smt spare parts,like feeder ,nozzles,motors,fitlers and smt machine,juki ,panasonic ,yamaha,siemens,samsung(hanhua) ; peripheral equipment ,conveyor,AOI,spi,reflow oven
Manufacturer / Equipment Dealer / Broker / Auctions
2nd floor, West side, Building 12, Hengmingzhu Industrial Park, 32 Xiangxing Road, Shajing Tongfu Industrial Zone, Baoan District
Shenzhen, 30 China
Phone: QYSMT / MOREL USA CONTACT – SUSANTA TRIPATHY.: 1-912-373-4005 / China Contact: 86-075521635007