Electronics Forum | Mon Apr 26 21:50:32 EDT 1999 | Dave F
Dave said: | | So Earl, have you gone honest and haken a real job or is this a consulting project? | | | | TTYL | | | | Davebert | | | | | DamnDaveBert, | | I know you didn't mean to insult such a sensitive one as me, but putting honesty and re
Electronics Forum | Tue Aug 04 16:30:36 EDT 1998 | Jim Price
| I am considering of Philips FCM for the next production. | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | i.e. SOT might be populated in wrong direction. | Can somebody ad
Electronics Forum | Thu Aug 23 12:46:30 EDT 2001 | mkallen
In this case, I know my supplier's data is good. They've been supplying this particular PN for a long time now, and the stretch problem appears to be random within a given date code (i.e., most of the boards in each lot are good, but a few exhibit t
Electronics Forum | Thu Mar 31 04:39:56 EST 2005 | zsolt
Hello All, we have 2 CP842 on site and they are running simply perfect. We used our existing CP feeders (with the small reel holder). CP843 can compensate pick-up both in X and Y direction. also measuring the height of the part with a laser sensor.
Electronics Forum | Tue Oct 19 09:12:33 EDT 1999 | John O'Brien
Why use labels? They are expensive, fall off, get mangled, etc. If you directly mark the boards, you'll probably save money, enhance traceability, etc. One major contract manufacturer projects payback at 7 months just eliminating label cost and goin
Electronics Forum | Fri Mar 07 21:02:21 EST 2003 | neil
When printing below .5mm pitch, the recommended stencil thickness is 5Thou, laser cut. Do not use any reduction and ensure wherever possible the pad to space ration is 1:1, the length of the pad is not as important as the gap between adjacent pads. T
Electronics Forum | Wed Mar 23 11:40:21 EDT 2022 | SMTA-64388039
In my experience a distance of 30 mils per 1 mil in height above PCA nominal is sufficient for the squeegee blade to bend (in the direction of squeegee travel) so that you don't have excessive solder issues near the label. Labels are about 5 mils ta
Electronics Forum | Thu Sep 12 08:22:30 EDT 2002 | caldon
YOU think I could let this posting go by with out a reply??? PLEEEEASE. Genny- No matter what direction you go do your home work. This will require a lot of home work on you and your staff. If you go the contract manufacturing route GREAT!!! But hav
Electronics Forum | Fri Jun 24 08:47:14 EDT 2005 | grantp
Hi, There are many aspects to consider. 1. Firstly the room needs to be designed so it's sealed, so linoleum floors than curve where the wall meets the floor, so dirt does not get trapped in the corners, and mops get all dirt and pick it up. Floor
Electronics Forum | Thu Mar 18 12:32:16 EST 2004 | steve_arneson
There are many low cost paste inspection systems on the market today. It really depends upon your overall needs for process improvement. The CyberOptics LSM series of inspection devices use a single laser stripe to calculate both Height, Area and V