Electronics Forum | Thu Sep 09 20:48:12 EDT 2021 | laserstencils
I do not know of a way to measure the nano-coating. However, it is easy to check if it is still on the stencil. Simply use a 'sharpe' pen and try and mark the bottom (PCB) side near any openings. If it easily marks, then the nano is no longer present
Electronics Forum | Thu Sep 09 21:35:08 EDT 2021 | tey422
You don't really need to measure the center's thickness unless there is where the step up/down is at. As long as you can measure the the outer edge of the stencil, it would be the same thickness.
Electronics Forum | Tue Nov 08 20:20:32 EST 2005 | davef
Necessary tools are: * Chisel * Ball peen hammer After you buy two new nozzles, keep one in a baby food jar filled with your underfill suppliers recommended solvent for half the shift. At the break, swap the dirty nozzle on the machine with the cle
Electronics Forum | Fri Nov 11 09:41:12 EST 2005 | Eric C
Thanks for all your inputs. As I read through your responses, and through my research on the web, I have learned there are so many options to try and evaluate. The material we are using is loctite FP4531 - a snap cure flip chip underfill. Loctite ha
Electronics Forum | Tue Nov 17 11:55:13 EST 2009 | heba66
Hi! I think you need some professional help to develop your Electronics Engineering. If you need it, just visit Freelancer.com . You will find there thousands of great Mechanical Engineers who are really very helpful. You will get some extra facilit
Electronics Forum | Fri Jan 17 03:06:11 EST 2014 | aemery
Hey Comatose, did you get it fixed? If you still need help I can send you the schematics (No charge). If you got the machine from a dealer they should have been able to provide all this with the machine. If you like you can call me and I can give y
Electronics Forum | Tue Feb 24 16:11:15 EST 2015 | emeto
I assume you have a part number system. If so, you should kit the reel with less parts first from the same part number. If you don't use part number system, then you probably have components sorted by value and size, which should lead to the same pri
Electronics Forum | Wed Feb 25 11:42:29 EST 2015 | emeto
What software do you use to track your parts? We use Manex - it is not perfect but still gives you the opportunity to track parts/jobs relations. For example I know in each moment one particular part goes to 5 currently open jobs. You should explore
Electronics Forum | Wed Apr 22 21:10:05 EDT 1998 | D.Lange
I need immediate help temporary, permanent,contract or whatever. Have three quad 3c 100's, one with vision, and one 3-head Mamiya MarkII. Seriously need Extended PM's and regular PM if your PM schedule permits. Need permanent operator and or programm
Electronics Forum | Tue Nov 06 07:37:02 EST 2007 | cyber_wolf
Does anyone out there have a method of cleaning CP6 shaft clutches that is "easier" ? I am not a fan of just pulling the shaft down and wiping it out. I like to take them apart and clean/lube them. It is a pain to get the crowns back on without rip
.gif)
