Electronics Forum | Fri Jun 18 12:40:09 EDT 2010 | stepheniii
Are you talking about mini stencils for individual components? If so we check here first http://www.circuitmedic.com/products/stencils.shtml I think circuit medic only has ones for parts they have done repair work for. Their selection is a bit unu
Electronics Forum | Sat Jun 25 15:20:03 EDT 2016 | skipper6567
I have a mini/micro transformer that is mounted on a pcb inside my lowrance gps/plotter. I have removed it from the pcb. It has 5 through hole pins, 3 pins out bottom one side and 2 pins out bottom on opposite side. The transformer has yellow tape ar
Electronics Forum | Wed Oct 04 19:09:36 EDT 2006 | SWAG
IIT (Integrated Ideas and Technology) could cut you a mini-stencil for about $150 and have it for you the next day if you have the gerbers. Otherwise, they can scan a bare board and create a stencil from that. I've had excellent service from them a
Electronics Forum | Thu Mar 18 15:42:41 EST 2004 | davef
When it comes to re-attaching the BGA onto the PCB, we don't those very nice mini-stencils. They are very nice though. On sources for your rework stencils, try your stencil fabricator will be happy to make those very nice things for you. What's wr
Electronics Forum | Mon Jul 12 13:27:35 EDT 1999 | Upinder Singh
Hi all , We are trying to implement the micro-BGA technology at our plant. I need the clarification to the following points: 1. Is underfill required for micro-BGAs? 2. What type of stencil apertures are the industry standards for uBGAs and of wha
Electronics Forum | Mon Aug 17 02:50:44 EDT 1998 | Bob Willis
| Have an SRT w/preheat, 18 layer board all copper, 456 BGA needs to be removed and replaced. The manufacturer is Chip Express and during reflow it warps up or down. Causing either opens or shorts on the corners. I was using gel flux with multiple
Electronics Forum | Thu Jun 24 09:57:44 EDT 1999 | Vic Lau
Dear guys, I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now using a no
Electronics Forum | Thu Jun 24 10:11:33 EDT 1999 | Dave F
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 16:19:46 EDT 1999 | Kennyv
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Thu Jun 24 16:23:18 EDT 1999 | Kennyv
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin