Electronics Forum | Tue Dec 07 22:29:04 EST 2004 | fastek
Unless you can find a situation like Glenn's it would probably be cheaper to buy another oven already nitrogen equipped. $15,000-$20,000 buys them all day used.
Electronics Forum | Mon Mar 27 11:24:59 EST 2006 | mac
Had similar issue with Omniflow. Was actually jostling tall electrolytic caps off of pads. Found that idler sprockets/pulleys needed lubed.
Electronics Forum | Thu Dec 21 11:55:31 EST 2006 | realchunks
I have one form a year 2006. Uses the studds to keep track of revolutions. Four wires going to the motor.
Electronics Forum | Thu Dec 21 11:58:07 EST 2006 | Brandon
Can you send a digital pic to bgoodwin@pentechassembly.com please? Does it turn clockwise when powered on?
Electronics Forum | Fri Dec 22 05:48:29 EST 2006 | maxinorper
Hi, We have refurbished blowers. Cleaned them, changed bearings, capacitor. These parts are standard parts, you will find them in "any" hardware store and Radio Shack type dealers.
Electronics Forum | Fri Dec 22 11:21:50 EST 2006 | Jav Thug
pls share the photo with all. I would like to formulate a pie-chart on motor revolution
Electronics Forum | Wed Jan 17 21:02:48 EST 2007 | Jnet
If you are just wanting a replacement blower for your air crossflow cooling section. You should be able to purchase through Electrovert cheaper than $1600 dollars. Someone must have quoted you more than just a replacement blower.
Electronics Forum | Mon Jan 15 18:58:50 EST 2007 | leemeyer
Set the conveyor to run at 1 foot/minute and the conveyor moves 1 foot in 1:11. Set the conveyor to move 2 feet per minute and the conveyor moves 2 feet in 1:11. etc...
Electronics Forum | Mon Jan 15 19:21:08 EST 2007 | SWAG
Not sure if this has any bearing on the problem but did you check to see that T2 and T3 are jumped on the speed control board per the first note in the prodedure?
Electronics Forum | Tue Jan 16 07:44:48 EST 2007 | jdengler
This 11 seconds is constant? Seems like it's a clock issue. The machine thinks a minute is 71 seconds. Jerry
.gif)
winsouce.jpg)
