Electronics Forum | Fri Jun 08 07:45:58 EDT 2007 | davef
There is no standard for the spacing of components, nor should there be. We have a difficult time picturing your 0805 at a 45* to the wave and the safe pin, but we'd guess this spacing needs to be 10 thou.
Electronics Forum | Sun Mar 28 18:49:36 EDT 2021 | mekmat544
Hello, I would like to ask you if there is some formula how to calculate PTH hole and annual ring for pin in paste technology? Thank you. Mekmat.
Electronics Forum | Thu Jun 10 19:10:05 EDT 2021 | kojotssss
Hi, Get your account. https://software.indium.com/stencil-coach/pin-in-paste-apertures.php
Electronics Forum | Wed Feb 09 08:54:42 EST 2000 | pascal MATHIEU
Hello friends , in order to try to reduce our labour cost , we are thinking to replace manual placementof PTH COMPONENTS by automatic unit which 'll be able to place relays ,and connectors . is there anybody on this forum to advise us on this topi
Electronics Forum | Thu Feb 08 21:30:56 EST 2007 | Bill
Yes, many thanks for your reply.
Electronics Forum | Wed Mar 14 13:26:48 EDT 2007 | Hussman
Are these blind vias or do they go all the way thru the board?
Electronics Forum | Thu Mar 22 11:27:13 EDT 2007 | Oswaldo Rey
Good idea, I�ll try this, thanks.
Electronics Forum | Mon Jan 04 15:40:31 EST 2010 | dilogic
We recently got a job where (after placing SMT parts) we have to solder LED dot-matrix 8x8 display modules manually on the pcb. Due to the PCB design, it has to be TH type (also, it's the only type available) and soldered manually (or using selective
Electronics Forum | Thu Apr 29 17:52:33 EDT 2021 | mike_infl
We have an assembly which we are trying to machine pick and place a Mil-Max pin that is .020 dia placed in a .026 hole. The board is .1125 thick. We have to place 106 of these pins. Without going into the challenge of getting proper hole-fill to me
Electronics Forum | Wed Mar 14 12:06:15 EDT 2007 | Oswaldo Rey
There is an approximate 1W dissipation and has a 2 sq in area below part on solder side as a heat sink, vias are to physically conect this solder side area to power pad, so its necessary to use an adequate amount of paste. I really don�t think it has
.gif)
