Electronics Forum | Fri Aug 02 12:03:16 EDT 2019 | dfl
UPDATE: I was reading around about similar problems. My function #30 always return nozzle height 1. I tried to clean up the glasses and the internal laser lenses, no go, still at height 1. Even after removing both glasses, still at height 1. I saw s
Electronics Forum | Tue Dec 19 11:49:46 EST 2023 | jeana
Hi Everyone ! On our endeavor to get reliable pick and placing with our "new" Quad IVc, we got weird behaviours of the QuadAlign system. When we received the machine the glass of the laser side was cracked, so we removed it and it started working
Electronics Forum | Fri Mar 11 11:19:02 EST 2005 | Steve C.
I would change the Quad Align cable. If you have a spare head board swap that out as well. Make sure your Quad Align lenses are clean. If the camera is smudged then you can have some problems aligning parts as well. Let us know what you find. Cheers.
Electronics Forum | Wed May 04 08:17:57 EDT 2011 | leemeyer
Parts that are the same size can share the same extent #. If you are placing 100 different 0805 components you will need only 1 extent.
Electronics Forum | Thu May 05 07:41:19 EDT 2011 | leemeyer
Yes, what you are thinking is correct. Assuming an 0805 capacitor parts that are picked from the front and back of the machine will be picked at 0 theta. Parts that are on the left or right will be picked at a 90 theta. This way they can all share th
Electronics Forum | Sat May 07 07:03:16 EDT 2011 | jimlas53
Thanks for the suggestion, Bobpan. I'll start looking for a replacement coax cable. Would we be better off to look for a Quadalign system and replace the Cyberoptic unit? Doug
Electronics Forum | Fri May 06 09:39:26 EDT 2011 | leemeyer
Sorry but I have never worked with a machine that has the Cyberoptics system. Have you tried talking to PPM (www.goppm.com), They have been very helpful to me.
Electronics Forum | Wed Feb 11 14:17:08 EST 2015 | bobpan
Glad I can help....if you run into anything else....you can find my e-mail @ www.precision-repairs.com Thanks, Bob
Electronics Forum | Thu Aug 16 14:29:00 EDT 2012 | bobpan
Sounds to me like a dirty quad-align. If you have cleaned the lens and have the same results then you may have dirt on the inside of the quad-align. The only fix is to replace it or blow it out with an air gun. Unfortunately it is not easy to tell if
Electronics Forum | Fri Aug 02 19:45:58 EDT 2019 | bobpan
haha....thanks Steve!!! Nozzle Height of 1 means that you have dust or something in the quadalign lens. You need to clean the lens with alcohol then a dry lint free cloth and if it stays the same....that means the lens has an issue or there is dirt
