Electronics Forum | Sun Dec 09 03:27:03 EST 2007 | mpolak
can anyone please tell me what setting are they using for they 7 zone ovens? thanks
Electronics Forum | Wed May 14 21:47:03 EDT 2008 | davef
FAQ from Electronic Imaging Materials site: I am using 0.25-inch high labels in sets of six. How do I print this label configuration using BarTender? In BarTender, first ensure you are using the correct printer driver. Go to File Print and make sur
Electronics Forum | Thu Oct 30 12:38:11 EDT 2008 | davem
Steve, I forgot to put in the original post that the 2 friges are set on the maximum coldness settings.
Electronics Forum | Sun May 20 01:37:58 EDT 2012 | vileo72
Hi , Thanks for the link and could understand the limit setting . Regards Vikas
Electronics Forum | Mon Sep 03 21:49:26 EDT 2018 | aemery
Maybe your CMOS battery is dead! On some of these old system once the battery is drained the CMOS settings are lost, this would include the correct setting for detecting the hard drive and I doubt there is an auto detect . Try turning on the machine
Electronics Forum | Thu Oct 03 13:31:39 EDT 2019 | fundomikey
Thanks for reply. I'll try to check these settings. Greetings
Electronics Forum | Mon Jul 04 08:13:54 EDT 2005 | Tom B
Setting Speed for Ram is usually in the BIOS set up, Pressing DEL key, or F1, or ESC should bring you into the screen. It will usualy tell you on boot up. Look in there for the setting. Other times its a jumper setting on the motherboard. 7200 & 1
Electronics Forum | Tue Jan 31 15:40:44 EST 2006 | mgdrouin1
Comp is relay. I've pulled the spec. Max 240. Using Leister h/g with manual temp settings from 1-6 (20 - 600C)set by the operator. Gun was set to setting 4. They are using the heat gun to reflow the solder after SMT but before wave. High fai
Electronics Forum | Mon Mar 17 07:45:27 EDT 2008 | jackson
Hi SWAG, Bridging most contributed is from printing set up which is the parameter setting as well the board thickness setting. I would suggest you may check the parameter setting which mainly the squegee speed, stencil gap between PCB contact, print
Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti