Electronics Forum | Tue May 22 10:01:19 EDT 2018 | jacson_vu
Hi All, Could you share for me inspection spec that you set up for SPI machine ? Which standard you base that? IPC or something like that. So far, my factory set up as below: Area , volume , high are: lower limit is 60%, upper limit 160% for 0201 ch
Electronics Forum | Mon Jan 27 13:47:44 EST 2020 | dnachristen
The DEK Gridlock system should have rubber pads on top of the metal posts. We had them in our old Dek machines but upgraded to the fully automatic ones on our O3iX machines (Grid Lok) The manual ones can be tricky to set up and requires you to have
Electronics Forum | Thu Oct 08 20:59:59 EDT 2020 | sosigguy
hello, have you solved this issue yet? can you not use the teaching function for a part to set the pickup position? I believe we have worked around by changing the property of one of the feeder types(i think we used Stick-B) under the machine proper
Electronics Forum | Wed Sep 30 11:39:20 EDT 2020 | dontfeedphils
I used it years ago on an old semi-auto printer and thought it was alright for the application and asking price. Set it up once with a sample board, which takes maybe 5 minutes, and you should be set for the entire run. I still prefer something mor
Electronics Forum | Fri Jan 07 16:30:53 EST 2022 | tey422
I have a quick question, what's the tallest (highest) SMT part you ever encounter? 1.5 inch or more? I have to set a depanel router's clearance height. It would need to recalibrate again every time if the spindle or camera's height is adjusted. There
Electronics Forum | Wed Jan 04 20:18:35 EST 2023 | SMTA-64385948
Has anyone ever created a validation process for their SPI? I recently took over the programming of our Kohyoung spi's and was asked how do I know the settings I set are correct. The only answer I had was visual inspection under a scope and the set
Electronics Forum | Tue Oct 03 18:13:46 EDT 2023 | glasscake
Its ether going to be in the settings before launching the software at the login screen or the settings after launching the softer on the top right. You should see some tab relating to defects. There should be a setting that says something along the
Electronics Forum | Mon Oct 08 20:58:35 EDT 2001 | ericchua
Look like no way you can measure after glue printing. We have been running glue printing for about 2 years and using the "push test" method for testing the strength of connection of component and board. I don't see any problem. For component ( 0603 &
Electronics Forum | Fri Mar 18 14:27:29 EST 2005 | pmd
Hold on, MyData can place no component and not detect error if the minimum and maximinum settings in the centering phase are within the mesurement of the tool it'self. Especially if the levels are down between the jaws. For insurance make sure the to
.gif)
.gif)
