Electronics Forum | Tue Jun 28 04:40:14 EDT 2005 | thaqalain
Motherboard:Intel: D845GLLY requiring PC133,128MB I done all 3 possible cases: I-Inserted AZEN RAM PC100,128 MB in Slot#1 with Kingston PC133,128MB in Slot#0,it read 126 MB. II-Inserted PC100 only in Slot#0,it read only 64 MB and Ssystem was exces
Electronics Forum | Mon Oct 13 16:32:55 EDT 2014 | tombstonesmt
Designator>Part Number>Alternate. 2D labels are placed on all slots of the machine, operator scans slot, scans reel with unique material ID. Green light if it's good, red light if it's bad. Our software cannot lock out a machine if there is an incorr
Electronics Forum | Wed Jul 01 01:25:58 EDT 2020 | jmelson
> I think the main > issue is the bend radius you can apply to tape > with deeper pockets. Right, on my Philips CSM84, on the larger tapes, I don't thread the tape through the return slot, I let it play out the front of the feeder. The
Electronics Forum | Mon Aug 22 09:48:35 EDT 2005 | PWH
Post a simple CAD picture of a BGA or IC on the door of the machine near where it gets loaded. This has helped us. Flash IC's can also be difficult as you can't always put pin one near front, left of tray slot. So... we always say pin one left no
Electronics Forum | Tue Dec 05 09:09:38 EST 2006 | sigmasmt
These feeders come from an old OEM plant. They had a in house system they put together so the machine will not run until you had the correct feeder in place. Once the feeder was scanned and put into the feeder slot, the magnet would help recognize t
Electronics Forum | Tue Jan 28 09:51:01 EST 2020 | stephendo
I never understood why people would use foils. I worked at one place where maybe half the stencils were used one time and we got at least 2 to 3 new stencils a week on average. The extra space they took up was well worth not having to handle foils. W
Electronics Forum | Mon Dec 12 09:56:07 EST 2022 | peterm
Feeder Teach. Then it's the "Slot X,Y feeder teach" in the pulldown menu. That should be the default one, set feeder slot and the PTF as your feeder. If in doubt you can always make a back up in the feeder database as well. Probably a good idea eithe
Electronics Forum | Wed Dec 14 07:09:15 EST 2022 | bukas
yeah that ok but, MARK5 or other MARK programs dont contain drivers for communication card, its called LANGO or something like that. if cleaning connectors and slots doesnt work try fresh install if you dont have HDD image. but first clean connectors
Electronics Forum | Tue Apr 02 12:53:47 EDT 2013 | microaide
I have entered my machine configuration as much as I can figure it out. I will have two machines. One with tape feeders, and the other with vibratory (tube) feeders and a waffle feeder. I've tried to set this up as best I can. But I get to the screen
Electronics Forum | Fri Jul 16 09:49:25 EDT 1999 | Ronan BERTON
Hello, i'm looking for informations about companies which are using system to verify the loadind of a SMT machine by using barcode (on the slot on the machine & on the reel). I'm in charge of the installation of this kind of system. I expect to have
winsouce.jpg)
.gif)
