61 tdk results

Electronics Forum: tdk (Page 5 of 7)

TDK RX11 Machine

Electronics Forum | Tue Dec 09 11:22:12 EST 2003 | Michael N

What error message are you getting with your C Axis problem? Check the battery pack on the right hand side in the front it seems to me that probaly your losing your data. BE CAREFUL NOT TO REMOVE THE BATTERY WHEN THE MACHINE IS OFF, IF NOT YOU'LL HAV

Component Drop on Second side of the reflow

Electronics Forum | Mon Aug 14 03:38:37 EDT 2017 | spoiltforchoice

The pads in the datasheet should suffice. The TDK part really isn't all that big but its reflow profile indicates it is not exactly the most tolerant device with regards to heat. 245C for 5s is not a lot, I would check very carefully that your profil

Cracked Capacitors - Analysis

Electronics Forum | Wed May 22 10:27:42 EDT 2019 | Matt

thanks again for the feedback were your cracks mostly visible in relation to images shown in the document here: https://www.digikey.ca/en/pdf/t/tdk/guide-flex-cracking-mlcc most of our cracking has been lengthwise across the body which from what i

Cracked Capacitors - Analysis

Electronics Forum | Tue May 28 18:23:15 EDT 2019 | slthomas

TDK makes the CGA series "soft termination" caps. The p/n we use is CGA3E3X7S1A225K080AE, which will get you in the ball park for datasheets. We have moved to this to counter some variability in a heat staking machine (that we have yet to work out

Re: flip-chip

Electronics Forum | Fri Sep 04 09:39:54 EDT 1998 | jim foley

:I believe it can be easily done using the universal GSM platform. You may want to contact Universal instruments corp. in Binghamton NY for further information. We are writing to have information about the automatic mounting process of flip-chip.

Re: Is there Any Nozzle Vendors ?

Electronics Forum | Mon Jun 29 15:36:10 EDT 1998 | Steve Gregory

| Is there any vendor of Nozzle in Aftermarket, so tell me... | tks... Sandro, Yes there is. There is a company in Texas called: WP Sales Inc. 2317-D Roosevelt Drive Arlington, Texas 76016 Phone (817) 459-0181 FAX (817) 459-0182 WEB Page: www.

Re: Is there Any Nozzle Vendors ?

Electronics Forum | Tue Jun 30 06:41:40 EDT 1998 | Wayne Bracy

Setup speed, Samsung, Yamaha or Juki ?

Electronics Forum | Mon Aug 01 13:30:05 EDT 2022 | unisoft

>> ProntoPLACE creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic features of ProntoVIEW-MARKUP. Most machines are supported such as Assem

Component orientation

Electronics Forum | Thu Aug 04 16:08:11 EDT 2022 | unisoft

>>>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feat