Electronics Forum | Fri Sep 05 09:22:53 EDT 2014 | rgduval
Hi, Rebecca, Hmm...two x motors? I'm a couple of years removed from MyData's, but, I don't remember two x-motors. Might be something in the My12's that I didn't see in my older My9 (and certainly not in my TP9). As to the small board...unfortun
Electronics Forum | Wed Oct 18 16:41:35 EDT 2000 | Dave F
It's unrealistic to think that two materials with the following disperant properties would have the same reflow profile. From http://www.norplex.com/Carrier.htm Physical Properties / NEMA FR-4 / NEMA CEM-1 Glass transition temperature �C / 130 / 10
Electronics Forum | Tue Apr 27 13:41:16 EDT 1999 | Scott McKee
| i am trying to design a stencil fixture for manual printing. has anyone done this before or has an idea? thanks | There are sooo many variables; product size, 1 vs. 2 sided boards, support, component size, pitch, stencil alignment, PCB thickness,
Electronics Forum | Mon Apr 07 14:03:27 EDT 2003 | ksfacinelli
We have a client we would like to have switch from leaded can components to surface mount versions. We currently are utilizing these on a number of designs but his concern is in the area of reliability of the solder interface. The caps generally ha
Electronics Forum | Fri Feb 01 18:44:26 EST 2008 | jmelson
I looked at a number of small bench-top batch ovens and saw two things. First, they got VERY expensive when you got above the very smallest units. Mine will fit an 8 x 12" board. I still have to do one that size and see how uniform the temperature
Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
Electronics Forum | Thu Sep 04 16:36:29 EDT 2014 | chemers
Thanks for the response, Rob. I tried the MOT cards and the problem did not move. I swapped the MOTY with the MOTX, but the MOTX had a small board attached to it that I moved to the MOTY that I tried. Do you know if there is a way to test that small
Electronics Forum | Fri Sep 05 09:33:32 EDT 2014 | cflames17
It could very well be the Safety Relay located inside the ELMO PSU (Bottom left in computer cabinet). I just had the same problems on 2 MY9's within 2 months apart. the Part cost around $700.00 from Mydata (Now Mycronic). These fail commonly with old
Electronics Forum | Wed Dec 04 08:00:57 EST 2019 | kylehunter
Thank you both. We are using EP256 Solder Paste Sn63Pb37 no clean from Kester. I attached our profile as well as Kester's target profile. We used a populated demo board for the profile. We tested along the width, and was less than a 2c difference.
Electronics Forum | Fri Sep 19 11:58:49 EDT 2008 | davef
Four Points supplies materials to stencil fabricators. Four Points, SMT Stencil Supply: Standard Frame Sizes 8" x 10" I.D. Cast Aluminum 12" x 12" I.D. Cast Aluminum 15" x 15" I.D. Cast Aluminum 12" x 17" I.D. Cast Aluminum 15" x 15" I.D. Cast Alu
