Electronics Forum | Mon Nov 06 05:50:28 EST 2006 | aj
Bill, I thought I had it bad here!!!! I am sure if you contact your Paste Supplier they will give you all the advise you need. Better still contact a Printer Supplier and tell him to assist you in justifying the purchase of a new printer.(I am sure
Electronics Forum | Wed Dec 06 07:24:22 EST 2006 | davef
Successful solder paste overprint is a function of the solder paste rheology, solder mask and through hole component stand off. * Solder mask with a high surface energy will permit a larger overprint than a solder mask with a lower surface energy. In
Electronics Forum | Fri Mar 02 16:56:37 EST 2007 | vickt
Mark, How about a "line booster" such as the Universal AdVantis AC30L? The Lightning head provides a huge boost in throughput for your existing line, while also adding to the component range. One solution is to put it in the middle of a line to retur
Electronics Forum | Mon Mar 12 09:25:16 EDT 2007 | rgraves
Our internal designers are employing SMT connectors that utilize a �PCB positioning boss� in conjunction with normal gull wing leads. The use of these devices is based on the advertised ability of the boss to prevent �mis-insertions� and assist in �
Electronics Forum | Sat Jul 28 08:37:52 EDT 2007 | davef
There is no good choice. Board Finishes: Industrial/Battelle Class 3 Environment [Reliability Knowledge Gaps: For use of Pb-free solders in High Reliability Applications, J Smetana, iNEMI Availability of SnPb-Compatible BGAs Workshop, March 1, 2007,
Electronics Forum | Mon Nov 19 13:27:21 EST 2007 | etienne
People not knowing how to use them...surely not my case........I have worked for more than 7 years with a Topaz and always performed the maintenance and repairs on my own without the assistance of field service engineers!!! Please respect cause I kno
Electronics Forum | Tue Jan 15 21:44:05 EST 2008 | davef
We believe that tip tinners reduce the life of the tip, also. Why do you use such a product? We like using solder paste to clean solder tips. Place expired solder paste in a covered container. Open container and dip the tip. It comes out clean and s
Electronics Forum | Tue Jul 29 01:15:51 EDT 2008 | devinrhode
Thanks A lot for your help. I dont know what could hold a 5mb song and how to make it auto play when it opens up. Im afraid those sites wont show me a template for something like that? Is there anyone skilled enough that could just go on paint and de
Electronics Forum | Thu Nov 06 09:27:46 EST 2008 | rway
I would rethink your schematic. If you are using D1 for power indication, put D1 in series with a 1KO resistor to ground. D1 will 1.5-2.2V which will your supplies voltage to your 555 timer. What are you driving on the ouput at pin 3? If you ar
Electronics Forum | Tue Nov 25 11:58:31 EST 2008 | rway
Hello all, We are using z1850/60 machines. The APC test is damaging a 1.8V device on the board. The APC stimulates -/+3Vdc in fast mode. I understand the dangers of over-voltage. But what I need to know is how the part is being damaged when the ent
