Electronics Forum | Mon Jul 10 13:57:21 EDT 2023 | ttheis
We were able to get the machine to zero after 'scrubbing' the encoder head. We used a piece of paper towel and IPA and slipped it between the head and the scale. We moved it back and forth a few times to clean the head then blew out any remaining dus
Electronics Forum | Thu Jul 20 08:27:18 EDT 2023 | smtusa
I'm not finding much information on Pin transfer being used in modern day equipment for solder paste dispensing. Is there a particular reason time pressure dispensing overtook that method? My understanding is pin transfer is a much faster, more rep
Electronics Forum | Thu Aug 10 15:06:03 EDT 2023 | thecolonel97
We tried choking down the water flow to the coolers yesterday just below above the point of where we wouldn't detect flow in the system. This raised the temperature in both coolers for this test. This morning when cleaning the buildup, this had mad
Electronics Forum | Thu Sep 14 06:18:00 EDT 2023 | deniseburton
Hello, mcdvoice It seems like your Juki RS-1R machine's laser height calibration may be off. When measuring a 0402 resistor, it consistently reports heights around -0.60 to -0.70, causing pickup issues during production. Manually adjusting it to -
Electronics Forum | Wed Dec 06 17:22:03 EST 2023 | madisreivik
Hello and help ! After changing oil hose, cleaning machine and all nozzles, CP642 narrow camera started to flicker. And in nozzle centering measuring, no image at all. We checked syncro pin, seems ok. Also checked camera picture with Sony monitor,
Electronics Forum | Tue Mar 05 14:06:41 EST 2024 | mistrthou
We don't own one, I'm a bit interested to see what you end up with. We do have a triden pcb wash, and I know Aqueous Technologes makes a lineup of misprint and stencil cleaners. We had an engineer in from Zestron chemical company, and while they don
Electronics Forum | Wed Mar 06 15:06:51 EST 2024 | jparker
Very satisfied customer of 2 Austin America Technology X30's. One is 11 years old and the other is 3 years old. We have them both setup as a closed loop systems, and the solution we use is "Kyzen E5615", 100% full strength. You can setup different pr
Electronics Forum | Fri Mar 08 15:19:44 EST 2024 | tommy_magyar
MiniSwash PBT user here - happy customer with a closed loop washing system. CC8 and DC8 filters used to filter rinse water (not sure if these are included for you, otherwise you may need to look for these too). 3 filters (10, 5, 1 um) to filter the w
Electronics Forum | Sun Mar 10 05:28:03 EDT 2024 | dimamalin
Hello friends, over three thousand specialists have seen my post, but only three have reacted, and I'm very grateful to them. Even the simplest remark would satisfy me, like "we have such-and-such stencil washing machine, we've been using it
Electronics Forum | Thu Mar 14 15:55:34 EDT 2024 | davef
Process Requirement Standard - J-STD-001 - Requirements for soldered electrical and electronic assemblies depicting minimum end product acceptable characteristics as well as methods for evaluation (test methods), frequency of testing and applicable a