Electronics Forum | Sun Jan 13 01:08:51 EST 2008 | slthomas
Good luck with that. If you can find a source for 10X-40X zoom scopes on a boom stand with a fiberoptic illuminator for $200 let me know. The light systems new are about $250. As a point of reference, I think we paid about $2k for a Meiji system l
Electronics Forum | Sun Jan 13 01:40:40 EST 2008 | operator
The ones on EBAY are 20x - 40x on a boom with a 12 watt ring light. Yeah the fiber optic light will definitely run the price up. These are looking like the best deal around. I was hoping somone on here would know of a used equipment dealer or somethi
Electronics Forum | Tue Jan 15 16:50:44 EST 2008 | gregoryyork
Try Digitus - Microscope Camera with built in LED Lighting. Probably around 140 Dollars we just purchased three not tried mine yet but my reps like them and they go to 200X mag - incredible I think it is http://www.digitus.info thats what it says on
Electronics Forum | Mon Jan 14 18:19:35 EST 2008 | geb
Thanks for the info. I use the machine with a 1mil for resistors and capacitors and the machine with the 2.6mil for ICs (both have a 4mil.) This is because the r's & c's seem to benefit from the 1mil, more than IC's. I was thinking of making the mach
Electronics Forum | Fri Jan 18 09:04:24 EST 2008 | jdumont
We have an Advanced Techniques AT707 system. Overall I am pretty pleased with it. Honestly we went with them because it was one of the lowest priced models when we were first getting into BGAs four years ago. They are worth a look. This year ill be l
Electronics Forum | Wed Jan 16 09:24:11 EST 2008 | rgduval
In general, they certainly can be touched-up. I don't know of a CM yet that doesn't use a touch up step of some description. However, you'll want to be looking at the process to try and determine what is causing the pin holes and blow holes, and tr
Electronics Forum | Wed Jan 16 10:52:19 EST 2008 | kbhatia
R SMT line flow to a R->L flow after the 90 degree turn. We have some equipment that is R->L and wish to interface to the end of this line. So the flow is oven (with enough air blowers that the 8040 is cool) -> 8040 turnstyle to move LEFT (technicall
Electronics Forum | Thu Jan 17 09:55:44 EST 2008 | cyber_wolf
Bill is no longer with SMT Research. The camera cal/replacement on CP6 is better off left to the pros.Unless your techs are VERY familiar with the procedure. Call Greg Frazier @ 704-995-4591 he is with SMT Resource. Greg has done work for us in the
Electronics Forum | Fri Jan 18 11:22:52 EST 2008 | vikkaraja
I went to class a long time ago and I have the procedures. I just have to find it. Just make sure you maintenance person knows what he or she is doing. It just takes a little patience. E-mail me your fax or phone number
Electronics Forum | Fri Jan 25 21:05:24 EST 2008 | daxman
Hey, It's not so bad, but you'll need nozzle jigs to measure camera angle and resolution and also a good dial indicator. I'm pretty sure that I have the pdf's handy as well. send me an email at meshuga@sasktel.net. I'll be able to send you the info
.gif)
