Electronics Forum | Thu Oct 29 08:45:51 EDT 2009 | bobpan
Using older quad equipment is all about experience and knowing the right people/engineers....If you dont....you will end up thinking the machine is a 'turd' when its really just a lack of knowledge or knowing the right people. The manuals will not he
Electronics Forum | Wed Nov 04 12:21:34 EST 2009 | adlsmt
Considering the volume it would seem you are better off to go to a small contract shop. If you let us know what area you are in Im sure you could find one that would be acceptable. You should not have problems with accuracy or lead times with the typ
Electronics Forum | Thu Nov 05 10:02:54 EST 2009 | swag
You can buy a couple of conveyors for loading and unloading machine or a real half aced way is to jump SMEMA cable pins with tweezers to get boards in and out. With that method, you could end up with one on the floor at some point with a smashed, de
Electronics Forum | Fri Nov 06 10:55:03 EST 2009 | jeffreyj
Veering back over to table-top stuff, any comments on the APS Novastar models? Specifically, the LE and LS40 with and without vision? I'm assuming I'll probably need vision, but maybe since the finest pitch parts on my board (SOT-363) are 0.65mm pitc
Electronics Forum | Mon Nov 16 11:08:41 EST 2009 | jamike
Firstly if you buy a used machine you may be inheriting someone else's headache, the reason its being sold is probably because it's old, worn or unreliable. We have had a JUKI KE 2060 from new, it has been worked hard everyday for several years with
Electronics Forum | Fri Oct 30 08:12:10 EDT 2009 | rajeshwara
HI NEMO , I HAVE GOOD EXPERIENCE OF PDT AOI SUPPLIED BY SAMSUNG TECHWIN IT IS CAPABLE OF HANDLE SUCH THING AT GREAT LEVEL ,JUST NEED GOOD UNDERSTANDING OF PROGRAMMING AND DEBUGGING , WE ACHIEVED 100 PPM WITH HELP OF IT , U GO FOR 5 CAMERA WHICH WIL
Electronics Forum | Fri Oct 30 12:48:59 EDT 2009 | dannou
I've been the AOI programmer for around 5 years now. The equipment I use is the Orbotech VT-9300 & VT-9500 systems. The programming isn't too difficult, mostly Grey-scale shadow measurement through application algorithms. Three levels of lighting an
Electronics Forum | Fri Oct 30 19:47:46 EDT 2009 | bigdaddysoy9
I programmed Orbotech VT-8000 and VT-9300 for around 5 years also. We have been using VI Technology Vi3k3 machines for the past 2 years. I find them to be far superior to the Orbotech machines in every way. To be fair, the Orbotech models we used wer
Electronics Forum | Thu Nov 05 00:11:11 EST 2009 | shinseimy
Hi, You might be can consider try our brand AOI checker. We are the manufacturer the AOI which located at Malaysia. The programming is very easy to use, and effective on the speed. Furthermore, 2D barcode reader, NG marking included. If you are inte
Electronics Forum | Sat Nov 07 14:05:43 EST 2009 | doremi
Hi, I have 4 years as an AOI Process Engineer and we are working with 3 types of AOI - Marantz 22X, VI3000 and Omron (RNS & VT-WIN2). For solder joint inspection (solder meniscus quality, insufficient solder, wetting problems, shorts (bridges) Omron
