Electronics Forum | Wed Jan 27 11:42:50 EST 1999 | John Zisa
| hi, | i am working towards developing a no-clean process for a customer at contract manufacturing facility. the assemblies have gold fingers on them. these are masked to prevent from any damage to them during reflow soldering. the earlier proces
Electronics Forum | Mon Jan 18 20:25:49 EST 1999 | Dave F
| I know there was some discussion a few months ago on this topic but I don't think a good solution was offered for checking CpK using chips using a chip shooter. I am looking for a way to measure this on our Fuji CP6-4000. Any suggestions? | | Je
Electronics Forum | Thu Jan 14 22:52:28 EST 1999 | Wayne
I am experiencing a problem with a surface mount coax connector that over time pulls loose from the PWB. The connector has 4 small gold plated leads and we are soldering it to a flash gold board. A cable plugs into the connector and puts some const
Electronics Forum | Tue Jan 12 18:33:54 EST 1999 | Jorge L. Torres
I am currently using Alpha WS629. I have a Malcom SPS-1 Solder paste mixer. I find that the mixer after running for the recommended mixing time (10 to 18 Min) ball's the solder in the jar. 1) Is there any other Manufacture having the same prob
Electronics Forum | Fri Jan 08 15:02:38 EST 1999 | Dave F
| HI! I am a package engineer in Korea. I have some reasons | to desolder excessive solder at the lead of TSOP and TSOJ | after removing them from the board. The way with solder wick is too time-consuming and depends on the operator. | Does anyone
Electronics Forum | Sat Jan 09 16:01:18 EST 1999 | Jason Hall
| What kind of equipment are you using to gauge the thickness of your stencil after it's used for some months? How to determin the condition of the stencil? Your input is much appreciated. | | Ken Mok, based in Shenzhen, China. | | Ken, I have neve
Electronics Forum | Tue Jan 05 22:18:50 EST 1999 | Cunli Jia @ SMTnet
Tony, Please check out PRECISION PCB SERVICES, INC. in Santa Clara, CA. They specialize in PCB repair including training. Call (408) 654-0773 and ask for Dennis, or e-mail him at ppcbs@aol.com. Their web site is listed below too. Good luck. Cunl
Electronics Forum | Tue Dec 08 18:00:21 EST 1998 | Dave F
| I would like to talk with anyone that owns a Zevatech 570 or 575. I currently own 2 PM460's and am looking for a brief upgrade to a 570 or 575 before buying a 750 or 760. | Any information will be helpful. | | Brian Morgan - VP Manufacturing | B
Electronics Forum | Fri Nov 27 08:58:39 EST 1998 | Des
I have a PCMCIA type pcb with an 0603 resistor situated exactly half way along the longest edge the device is 2mm form the edge of the pcb. I have experienced incidences of the device fracturing after breakout (hand operation) (pcbs are routed) Coul
Electronics Forum | Tue Dec 01 10:19:43 EST 1998 | Dave F
| I have a PCMCIA type pcb with an 0603 resistor situated exactly half way along the longest edge the device is 2mm form the edge of the pcb. I have experienced incidences of the device fracturing after breakout (hand operation) (pcbs are routed) Co
