Electronics Forum | Tue Mar 26 11:37:39 EDT 2013 | dman97
Hi Deni, I have access to the online database, but I don't see the option for machine manuals. I only see the trouble shooting guide. 2 of my machines are running a variant of UPS 3.1 on OS/2. The other machine is running an older 1.4 OS/2.
Electronics Forum | Mon Mar 25 13:18:05 EDT 2013 | emeto
Hello, I have an issue with SOD 923 out of the oven. The part looks grainy, doesn't show a good wetting and looks like it has to be touched up. Everything on the board looks beautiful except this part. I tried with the profile, I checked the pad des
Electronics Forum | Mon Mar 25 16:40:17 EDT 2013 | rrpowers
I have a customer that is wanting to use a low-temp solder paste such as SnBi for a lead free circuit, however they are specifying PET for the flex circuit. I have always used polyimide for SMT reflow due to the temperature limitations of polyester.
Electronics Forum | Fri Mar 29 09:34:21 EDT 2013 | lkavan
Dear friends, I need to retune servodrivers Panasonic MSD5A3P1EA in my Tenryu MT5530. Some Z axis servo loops are unstable. But I cannot find old Panaterm software for DOS which should be able to communicate with these old drivers. Can you help me? P
Electronics Forum | Fri Mar 29 13:41:32 EDT 2013 | isd_jwendell
Wow, that takes me back... I think I have a copy on an old computer that I don't have access to right now. It may take a couple days, but I'll try to get it this weekend. If nothing else, I have a contact in New Zealand that should have a copy.
Electronics Forum | Sun Mar 31 07:43:32 EDT 2013 | lkavan
Thank you very much, you are an angel, DOS software works with these drivers! But some servos still shaking and I cannot tune it by decreasing the gain or autotuning :-( Problem is with driver, when I change it servo works well. All drivers have the
Electronics Forum | Mon Apr 01 14:26:43 EDT 2013 | babe7362000
Sounds like you need to be at a different level of operator. They may have had operators locked out. You will need to know the password or if you know dos well, you can find it out there. You can also call PPM for assistance. Just search PPM and yo
Electronics Forum | Thu Apr 04 07:09:39 EDT 2013 | leemeyer
Autoprogram will use whatever tape feeder width is defined for that component (SMD type)and will adjust the pickup accordingly. Autoprogram will not tell you where to place Vibs and Matrix trays. You need to decide where to mount the holders. Then m
Electronics Forum | Mon Apr 08 13:53:46 EDT 2013 | leemeyer
I copied a program to a floppy and compared that to the files that were in my AP board directory and they are identical. In your board list directory (on your AP machine) look at picks.asc and places.asc and see if there is any good looking data the
Electronics Forum | Thu Apr 18 05:23:38 EDT 2013 | bobpan
To use 2 heads in autoprogram.....each one should be defined in the assembler system. You have to use the option to breakup programs for seperate central controllers if indeed they both have their own computer. The most important thing is each assemb
