Electronics Forum | Tue Apr 09 22:32:05 EDT 2013 | jeffr
There is no easy way... but this is how I do it.. Origin the R axis, losen the idler bearings on the belt, remove the C clips at the top of the heads, lift up and remove the spindle assemblies being careful not to lose the 2 balls in the side of the
Electronics Forum | Fri Apr 26 15:01:09 EDT 2013 | jorge_quijano
Hola Evtimov, I do the same with my Solder Paste Jars, there is a label that is filled by the warehouse guy & by the line operator; time & date the jar arrived to plant, time & date the jar was taken to production line (out of the refrigerator) and t
Electronics Forum | Tue Apr 09 16:31:49 EDT 2013 | alfredodsanchez
Hello everyone! I have a problem with PCB, we detect that some contamiation apear (dark spots similar to glue or underfill) we detect that this element is Policarbonate. I don't know if on PCB fabrication process some policarbonate are used. We alr
Electronics Forum | Thu Apr 11 11:32:16 EDT 2013 | markhoch
It might help to investigate the error code provided for the rejected parts. It could help point your troubleshooting methods in the right direction. (Example, if it's failing for vision errors, you may need to make adjustments to your vision file di
Electronics Forum | Thu Apr 11 14:11:10 EDT 2013 | dontfeedphils
If it's using the laser alignment try changing the part type to "SOT" instead of chip, and then enter the dimensions for only the body of the component. The "Chip" setting will measure the part half way down the body, the "SOT" setting will measure
Electronics Forum | Wed Apr 17 05:21:50 EDT 2013 | navbill
Hi, We have QSV-1 machines with stock Quad IQ feeders (8 pins). Some of these feeders will produce a "feeder does not exist" error on both the pick and place machine as well as the OLS station. Is this a problem that can be fixed by us or do the f
Electronics Forum | Thu Apr 18 17:42:26 EDT 2013 | navworx
Just because a feeder has 8 pins on the front > does NOT mean it is IQ. The IQ feeders started at > a certain level of feeder part number.....which i > do not remember being that many people dont use > the IQ system. > > Good Luck It has PLD v
Electronics Forum | Tue Apr 23 02:35:41 EDT 2013 | padawanlinuxero
If that doesn't work don't know if your are in the US but if you are there's a guy that has a company call dekhead (yes thats the name of the company) he has a lot of experience with DEK machines He has help me a lot when some problems came up with o
Electronics Forum | Fri Apr 19 07:34:37 EDT 2013 | davef
Hola Jorge I can't make-out the corrosion on your board. Do you have a better picture? Since your fab told you not to worry, in that, did he / she describe the corrosion and it's source? On your base question 'should I ...' In the works of Ronald
Electronics Forum | Fri Apr 19 20:05:16 EDT 2013 | jorge_quijano
Hola After some investigation I found that these units have this oxide after reflow, so I'm guessing that may be some process related issue, I'm attaching pictures for reference. My supplier has not given me any explanation so far, they are working
