Electronics Forum | Tue Oct 16 10:06:41 EDT 2018 | emeto
Hello experts, I have an assembly that goes through pretty tough sterilization on regular basis. Currently I am using a two component material in potting process. I was wondering if you can help me with material that can handle high temp and humidit
Electronics Forum | Wed Oct 17 02:04:39 EDT 2018 | robl
SCC3 has an operating temperature of 200C, as long as it is heat cured at 100C. https://www.electrolube.com/pdf/tds/044/DCA.pdf It's also a silicone so needs to be coated & cured away from anything you value. Otherwise there are plenty of PU's and
Electronics Forum | Thu Oct 18 12:24:23 EDT 2018 | robl
Hi, does anyone have any of the reel storage units from Yamaha or Europlacer built by the Italian company IEMME? www.iemmegroup.com/mod/pages/frontend/ctrl/?id=7 I've just changed companies and inherited a couple that haven't been fully integrated
Electronics Forum | Mon Mar 11 06:46:58 EDT 2019 | ronnielinak
Hi Rob. Did you ever solve this issue with Europlacer/IEMME. We are planning to bye one Lzero3 for the time and have not decided yet what to integrate with. We have meeting with Europlacer next week so i will mention your concerns if they are still
Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti
Electronics Forum | Wed Oct 24 01:11:03 EDT 2018 | filipblad
Here is a video clip of the issue: https://photos.app.goo.gl/zGfXiPYAhfKFYmN96 and in this clip you can see the solenoids opening if you look closely: https://photos.app.goo.gl/j9ozSVkuNBT2Mxq36
Electronics Forum | Fri Nov 02 17:23:52 EDT 2018 | cbart
are these requirements outlined by your company or the manufacture of the part? if its your company is the product tested? if so the test guys don't usually like to power things up with water trapped in them or under them as it can cause some problem
Electronics Forum | Fri Oct 26 05:03:17 EDT 2018 | farouk225
Hi everybody, I have a question about the minimum distance to leave beteween a non non-plated mounting hole with copper pads and the edge of the PCB. Is there any formula or rule to apply ? For example for a hole of diamater equals to 5.6mm which
Electronics Forum | Sat Oct 27 14:57:00 EDT 2018 | jacobidiego
Hi Experts, I have noted a savings opportunity on our work-place as chipmounters discard carrier tapes which are easily separated in different waste-containers below the feeders. Normally the company pays a service to dispose that waste. Have anyon
Electronics Forum | Tue Oct 30 06:09:15 EDT 2018 | directx995
It's prob better to ask them which machines they use, since you have a few extenstion for only 1 machine manifacturer. Also, it may be a CAD file and you have A LOT of different CAD extensions, so I think it's better to make it clear with that EMS co
