Electronics Forum | Thu Sep 12 20:17:59 EDT 2013 | action_101
Good ole contact cs-400. I worked at two different companies that had these machines, all I believe were E's except 1 C. One place had one and the other place had 4 of them. Dont take this personally, but thank god my current employer doesn't have a
Electronics Forum | Tue Jan 21 13:51:19 EST 2014 | rgduval
Armando, Is the problem in the same spot on the board with every run? If so, there might be something about that particular location that is part of the cause (ie. ground or power plane connection). It sounds like you're seeing blow holes, or insu
Electronics Forum | Fri Jan 10 11:32:52 EST 2014 | rgduval
Hi, Hans, I would have suggested swapping the MOT card out to see if that fixes the issue (or, changing the MOT card with another one to isolate the card), but, it sounds like you've already done that. I'm surprised that MyData would point you towa
Electronics Forum | Fri Feb 21 09:55:47 EST 2014 | alpha1
I'm in the market for some new (to me) pick and > place equipment, and, could use some > opinions. > > I'm a MyData guy by experience, and > have recently been working on some older Philips > machines. > > I'm comfortable on a MyData > platf
Electronics Forum | Tue Apr 29 07:44:55 EDT 2014 | spoiltforchoice
Make sure you fully understand your own products requirements. How many components of each feeder type they will require? How many Feeder slots those feeders will require? How different each product is and how that will affect changeover times - whic
Electronics Forum | Mon May 12 14:49:28 EDT 2014 | davef
Hi Evtimov 'hege gave you a plausible explanation for what's going on with solder running-up the lead of your components: TOO MUCH METAL!!! I've got different one. This explanation goes along the way that you're thinking, but just opposite. The rea
Electronics Forum | Tue Aug 05 03:48:56 EDT 2014 | spoiltforchoice
If you are considering MyData (a fine choice) I would also consider Europlacer. They are in many ways, machines designed for similar markets with slightly different approaches and advantages. I would suggest much of your experience with Manncorp woul
Electronics Forum | Sun Sep 07 20:51:52 EDT 2014 | natashakt
1. Is the high RH environment consistently at 72% RH and 21.4 degrees Celsius? No, over the past 2 weeks I have recorded the highest at the moment: 67% RH at 22.6 degrees C and lowest (it is Spring not summer yet): 31.9% RH at 19.0 degrees C. Or d
Electronics Forum | Wed Oct 29 06:17:45 EDT 2014 | julianf
As stated in the title I would like to know the thermo-elastic material properties, most preferably the E-modulus and CTE in x- and y-direction, for Epoxy/E-glass laminates and/or prepregs for various fibreglass cloth styles. Datasheets only give ro
Electronics Forum | Fri Nov 21 12:12:44 EST 2014 | joe98375
On average there are about 3 parts per board that get hand placed (x24 is 72 parts per panel). One of these parts is a big 1W resistor that cannot fit on our axial machine. We also have a Zener Diode that needs to be hand placed because its leads are
