Electronics Forum | Sat Mar 11 07:33:52 EST 2023 | klauss
There's two kind of nozzles with different dimensions we use. One of them works good but the another one gives a head problem sometimes. The head picks the nozzle and gives the vacuum error despite the camera recognize it. So i make another head pi
Electronics Forum | Sun Mar 12 13:49:09 EDT 2023 | phuongvbhp
Hello everyone I am having Chip loss error at Line SMT, Mounter Panasonic , component type 0402,0603. The positions are not the same and the ratio is around 7/1000. I suspect the chip was dropped during the PCB move behind the mount. The OP's operati
Electronics Forum | Mon Mar 13 01:53:25 EDT 2023 | sophyluo1985
Dear Klauss,Maybe you can ask our GOLDLAND company, we are very familiar with the AM100 machine, you can send a message to our engineering team and describe your problem. They'll be happy to sort it out for you. I'll introduce you to our engineering
Electronics Forum | Wed Mar 15 11:34:28 EDT 2023 | proceng1
I'm sure this isn't the same situation, but we did have a selective solder machine with crazy dross and solder ball build up. Turns out the operator switched the low pressure nitrogen line used for solder level and the high pressure nitrogen line fo
Electronics Forum | Fri Mar 17 10:06:43 EDT 2023 | murty3565
Hello! I am trying to learn pcb design. I want to make a pcb with esp32-c3fh4 and bms together. I've read lots of schematics but since i didnt study electronic some parts of schematics i didnt understand. If someone can help me i will be really happy
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Mon Mar 20 21:46:31 EDT 2023 | emeto
The experimental way is the best approach for SPI settings and fine tuning. Have a start point of +/- 20%. You build 0402s and machine flags them 35% offset from value. You reflow, perform AOI - everything is fine. You go back and you move tolerance
Electronics Forum | Thu Mar 23 13:36:30 EDT 2023 | tomdegas
Running a Mydata MY 9 and trying to Restart the machine and try to initiate the hardware, get an error message of F-MOT-MSETDYN X/163: Illegal value of DSP command argument. It seems to be related to the x drive. I've check all the connections on
Electronics Forum | Fri Mar 24 15:10:20 EDT 2023 | tey422
I worked with 7 years of Mydata & another 8 years with Juki. Most of the small issues are avoidable if you do your maintenance right. From normal wear and tears, I would say Mydata would be more frequent breakdowns than Juki. For Juki, I agree with
Electronics Forum | Fri Mar 24 16:45:11 EDT 2023 | smtusa
Yeah laser centering didn't sound as reliable to us either. I have heard jokes about mydata but wasn't sure if they were serious. It seems like they have a huge following in US esp when compared to Yamaha/Assembleon. Did anything improve when they
