Electronics Forum | Mon Aug 14 12:06:18 EDT 2023 | calebcsmt
Please elaborate, as I have already tried to rule out printer setup. 0 contact of course, ive tried a multitude of pressures, separation speeds, cleaning frequency. Moreover, i use these settings for similar stencils and have absolutely no issue
Electronics Forum | Mon Aug 21 16:36:14 EDT 2023 | merliniass
Hi friend, so I can give you good advice on this. To ensure a balanced and enjoyable experience, it is imperative to set a budget for your gaming activities and adhere to it. While online slots may be an entertaining pastime, https://cityslots.org/bo
Electronics Forum | Tue Aug 22 15:22:46 EDT 2023 | thecolonel97
Our paste manufacturer failed to respond. I did try adding 2 frozen jugs of water into the reservoir tank, this did not lower the cooler 1 temp. We have to have a water or air flow restriction causing this to run hotter. Still currently investigat
Electronics Forum | Wed Aug 23 14:58:38 EDT 2023 | markhoch
I was at our local SMTA Michigan Chapter Tech Forum & Tabletop Expo last week and BTU was introducing a new option designed to reduce flux build-up in the heating zones. Might not be a bad idea to reach out to them to learn more about it. Just a sug
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Fri Sep 22 08:22:17 EDT 2023 | linux
Hello All, This would be a question for someone with experience in PCB design, Intrusive reflow Narrow profile connector(Electrode Rectangular) L=1mm X W=0.9mm. What shape and size hole is required in the PCB to ensure sufficient solderability and re
Electronics Forum | Tue Sep 26 08:35:58 EDT 2023 | carl_p
There appears to be plenty of alignment issues going on here. As some of it matches up ok & other areas not I would think your support is not ideal & causing gasket issues. Some app sizes also look questionable to me. I would look to ensur
Electronics Forum | Tue Sep 26 07:46:49 EDT 2023 | robertanderson
A transformer winding machine is a specialized piece of equipment used in the manufacturing of transformers. Transformers are electrical devices that transfer electrical energy between two or more circuits through electromagnetic induction. They cons
Electronics Forum | Mon Oct 02 12:22:46 EDT 2023 | carl_p
Hi, I use this Material, you can get a few different types to work with certain sensors but I've used them for a solid 12 months now for reflowing. I'm using multiple board materials down to 0.4mm & I've had zero issues. https://www.datumalloys.com