Electronics Forum | Tue Sep 15 19:09:36 EDT 1998 | Scott McKee
| We are a small contract assembly shop hand placing SMT. We recently received a large contract for SMD that will require placement rates of at least 6,000 CPH. I am looking at Fuji, Mydata, Quad, and Zevatech. I have little experience with automated
Electronics Forum | Tue Sep 15 02:17:37 EDT 1998 | Doug Kester
| We are a small contract assembly shop hand placing SMT. We recently received a large contract for SMD that will require placement rates of at least 6,000 CPH. I am looking at Fuji, Mydata, Quad, and Zevatech. I have little experience with automated
Electronics Forum | Fri Sep 11 09:30:30 EDT 1998 | Earl Moon
| Heeeelllllp. | I am a sales rep. ( I know I know, you can't help me with that. ha ha.) Actually, I represent a company that fabricates PCBs and assembles them under the same roof. We are a small to moderate volume house that is just getting int
Electronics Forum | Thu Sep 10 21:48:37 EDT 1998 | Dave F
| I'm very familiar with the great board space savings of BGA and all the "claims to fame." However, can someone out there tell me if any concern exist in the inspection realm. Additionally, solder cracking, CTE/TCE mismatches, no leads for stress re
Electronics Forum | Tue Sep 08 15:11:26 EDT 1998 | Mike Demos
Rich: In my experience, I have seen three cases of SMT Capacitors cracking: 1. Due to thermal shock when entering the wave solder. Note that these were 1210 package sizes on the wave solder side of the boards. We were able to trace this back to th
Electronics Forum | Mon Aug 31 13:33:15 EDT 1998 | Dave F
We�ve been thinking again and need your help in sorting through an issue related to deionized (DI) water cleaning of assembled boards. THE BACKGROUND: The water reclaiming systems goes: gross filter, fine filter, carbon bed, mixed resin bed, cation
Electronics Forum | Wed Sep 09 10:05:31 EDT 1998 | Earl Moon
| We�ve been thinking again and need your help in sorting through an issue related to deionized (DI) water cleaning of assembled boards. | THE BACKGROUND: The water reclaiming systems goes: gross filter, fine filter, carbon bed, mixed resin bed, ca
Electronics Forum | Sat Aug 22 16:07:31 EDT 1998 | Manuel Cornejo
| | Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | | Must be resistant to solvents such as MEK and acetone. | | Cure below 150C, with possible potential for rework of the conections.
Electronics Forum | Mon Aug 24 15:23:47 EDT 1998 | Dana Wentworth
| I am interested in hearing about people's experiences with buying used pick and place and stencil printing equipment. For example, was the cost saving worth the experience, was technical support available before and after the sale, did you deal dir
Electronics Forum | Thu Aug 13 07:53:40 EDT 1998 | Earl Moon
| | Couple of questions. | | 1) Are we talking alumina substrates as the ceramic material? | | 2) Are we co-firing gold as the conductors on the substrate surface? | | 3) In other words, is this a hybrid thick film circuit? | | 4) If so, how large or
.gif)
