Electronics Forum | Tue Nov 01 18:41:10 EDT 2022 | griinder
misc. Info), and the profile in component editor under the other tab. Default is 20. There is a way to change numerous values at once, but it takes a hidden click and password to do. First verify both places for a part are set to 20. Is it possible
Electronics Forum | Wed Nov 02 02:04:43 EDT 2022 | angela t
Bend it for mounting,if it can't be mounted by bending assembly. you can choose other pick and place machine which can handle this flex pcb. How long is this flex board? And do you use jigs when reflow? Could you please send a picture of the jig yo
Electronics Forum | Wed Nov 02 11:20:04 EDT 2022 | proceng1
Is the BLUE area the only place where parts are located? That is a very interesting concept. Why do they NEED to be flattened? Do they ship flattened, or are they installed flat? I assume that the use of flex is because the actual application re
Electronics Forum | Wed Nov 02 15:44:52 EDT 2022 | chicagosatcom
Which SMT line brand do you recommend for a new manufacturer with low-volume and low-mix? We have a new product that needs to be made locally and requires more flexibility and responsiveness than local CMs can provide. Does any particular SMT brand
Electronics Forum | Wed Nov 02 17:32:11 EDT 2022 | proceng1
I would suggest finding a USED Samsung SM482 or similar. As far as flexibility, we regularly do work orders of less than 25 assemblies. In fact, we have an SMT line basically catered to low volume runs. We are in Pennsylvania, so we aren't local, but
Electronics Forum | Thu Nov 03 11:35:51 EDT 2022 | proceng1
Also, be sure that your support pins are set correctly and do not allow the board to sag or bounce. Next, is your z correct? Its possible you are pushing the part so hard into the PCB that it's pushing back up or even bouncing the board and throwin
Electronics Forum | Thu Nov 03 14:54:54 EDT 2022 | richardcargill
It's a capacitor, not a resistor. From the datasheet and pin locations I'd guess at nothing more than a decoupler in the circuit. hard to tell for certain what package size it is, either 0805 or 0603 by the look of it. A 100nF 25v capacitor would p
Electronics Forum | Fri Nov 04 12:55:45 EDT 2022 | ibtonystark
We offer to give you the best Lexmark device support that any other company can. Our highly qualified and professional support staff is available around the clock to attend to your needs and provide prompt responses. Feel free to call our assistance
Electronics Forum | Wed Nov 09 17:50:42 EST 2022 | cyber_wolf
Take all of the nozzles out that are being used to place these parts and look at them under a microscope closely for blockages or dings in the surface that contacts the component. Check that the nozzle travel moves up and down smoothly and freely wi
Electronics Forum | Thu Nov 10 12:29:57 EST 2022 | stephendo
The G in ENIG is gold. It does not oxidise. Either you are thinking of OSP or your board shop is providing defective boards if your boards show oxidation. It would be the nickel that is oxidising but should be totally covered by the gold. Is there
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835