Electronics Forum | Tue Oct 12 09:52:18 EDT 2010 | dyoungquist
Obviously a totally clean floor is the best. So what if you have 1 particle of dust on your entire production floor? Is that 1 part per million (1 PPM)? or is that 1 part per billion? or 1 part per ???? How do you measure dust and come up with a
Electronics Forum | Thu Sep 08 12:50:39 EDT 2011 | deanm
We use both the black conductive and blue static dissipative ESD totes in the production of Class 3 military electronic assemblies. In some cases we use ESD bags, but most board assemblies are placed directly in an ESD tote with a lid. The totes cont
Electronics Forum | Fri May 22 12:42:43 EDT 2015 | deanm
Sr. Tech, you are right in that there is no verification of the profile. We are a Class 3 high mix OEM. We have visual inspection after SMT. We have not seen problems with wetting, grainy solder, cold solder, charred boards, etc. that would indicate
Electronics Forum | Tue May 26 10:52:02 EDT 2020 | spoiltforchoice
No idea, could be a weird translation error, but its certainly something I have seen . For an FLX they just ask for this "5-6 bar, clean, dry, oil free, filtered 2 µm, connection diameter 8 mm", 40litre/min Personally I would go with a mo
Electronics Forum | Wed Oct 18 16:33:26 EDT 2000 | Dave F
Mike: An omega meter has very little to do with ion chromatography. * IPC TM-650, 2.3.25B, Detection and Measurement of Ionizable Surface Contaminants is a process control method that washes boards with an isopropanol / water solution and measures
Electronics Forum | Sun Jun 07 19:09:21 EDT 1998 | Graham Naisbitt
Chiakl Ion Chromatography has been perfectly described by Dave, but here are a couple of extra considerations: Ion Chromatography will tell you precisely what is present on the surface of your board/assembly but it will not tell you whether it will b
Electronics Forum | Wed Nov 07 21:16:44 EST 2001 | davef
Consider using the following hierarchy of rules for pad design: 1. If you have a land pattern in a manufacturer�s data sheet, use it. 2. If the data sheet doesn't have a land pattern, but does have an RLP (registered land pattern) number or JEDEC n
Electronics Forum | Fri Jan 06 13:47:15 EST 2012 | davef
Your starting [and finishing] point should be IPC-7351B Land Pattern Calculator and Tools - http://landpatterns.ipc.org/default.asp For more, look here: * http://www.smtnet.com/bob-willis/pbdai.html * http://www.onboard-technology.com/pdf_novembre
Electronics Forum | Mon Dec 22 13:54:25 EST 2014 | proceng1
My customer made a process change to overcome a design flaw. The PCB assembly mounts in a plastic housing. The PCB mounts to the front housing via plastic stand-offs. They had to change a connector on the back side of the assembly due to long term
Electronics Forum | Tue Jul 03 10:20:15 EDT 2018 | yannis
Our firm is SMT factory exclude design, components are selected by customers. We are going on a project by studying the solderability life of warranty at least 3 year for customers requirement. The theory is if the workmanship is good enough, then th
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100